TECHNET Archives

May 2010

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Steve Herring <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Steve Herring <[log in to unmask]>
Date:
Thu, 13 May 2010 09:22:20 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (164 lines)
We use lots of Sam*** connectors here and have never seen anything like
this on the parts we use, which are in the same family. I would suspect
that these did not come from Sam***? The packaging the connectors came
in should detail the lot#/date code info, etc. Contact the mfr directly
with this info. and they should be able to help clear it up. 

Good Luck!

Steven E. Herring
Manufacturing Manager
Pennatronics
75 Technology Drive
California, Pa 15419-0638
P 724-938-1800 x 214
F 724-938-1809
[log in to unmask]
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Linda Langley
Sent: Thursday, May 13, 2010 8:33 AM
To: [log in to unmask]
Subject: [TN] FW: Connector issue

Steve has posted a picture for me and I would greatly appreciate any
information anyone can share.  The vendor says the connectors meet IPC
Standards.

Does anyone know of an IPC Standard that would address this issue?

 

Thank You Steve.

 

Linda Langley CIT

Training Specialist

Jabil Circuit

248-292-6176

From: Steve Gregory [mailto:[log in to unmask]] 
Sent: Thursday, May 13, 2010 8:20 AM
To: Linda Langley
Subject: RE: Connector issue

 

Hi Linda!

 

It's up! Go to:

 

http://stevezeva.homestead.com/Connector_SSW-101-01-S-T.ppt

 

Steve

 

 

From: Linda Langley [mailto:[log in to unmask]] 
Sent: Thursday, May 13, 2010 8:06 AM
To: Steve Gregory
Subject: FW: Connector issue

 

Steve,

Could you please post this picture? We are having an issue where the
vendor is saying they meet IPC Standards but I don't know of a standard
that would address this problem.

Maybe someone can point me in the right direction for information.

 

 

 

Linda Langley CIT

Training Specialist

Jabil Circuit

248-292-6176

From: Justin Hartley 
Sent: Wednesday, May 12, 2010 2:29 PM
To: Linda Langley
Subject: Connector issue

 

 

 

Thank you,

Justin Hartley
Supplier Quality Engineer
3800 Giddings Rd. 
Auburn Hills, MI 48326 
Ph: 248-292-6220
F: 248-292-6922
Cell: 248-320-3271

[log in to unmask]



 

 


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or
[log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2