My late 2 cents
Overall the industry is moving to halide free materials, but the prime
driver is environmental compliance not reliability. One day soon then this
will be an obsolete area, but for now:
This is possibly a more contentious area than it needs to be, but is
certainly confusing. Terms like "Halide free", "halogen free", "no free
halides" and so on are bandied around as if they are interchangeable when
they are not.
It is useful to know these formulation details (REL0, ROl1 etc) to help make
an informed judgement when selecting materials, especially if subsequent
processes like cleaning coating are to be done.
However within the L0/L1 no clean classification, the primary determinants
as to whether the residues are safe are SIR and electro-migration. There is
no distinction between halide and halide free.
So turning to the questions:
Can you get halide free solder wire now? Yes of course.
Do you really need it, see above.
Do flux /solder manufacturers make compatible product packages, yes.
But to test all possible combos even within a single manufacturer's range
would be a huge task, mixing in those from other suppliers impossible.
Regards
Mike Fenner
Indium Corporation
Europe
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Glidden, Kevin
Sent: Monday, April 19, 2010 4:18 PM
To: [log in to unmask]
Subject: [TN] Flux-Cored Wire Solder: Halide / Halide-Free
Greetings,
I've recently been looking into changing out some solder materials. I was
forced to change solder pastes due to product obsolescence. I am now in the
process of verifying compatibility of the hand soldering fluxes and solders
with the new paste. My current paste is halide-free. My current flux cored
wire solder is not. I asked a supplier about halide-free flux-cored wire
solder and the basic response is that you can get it, but it's really
non-standard, so it's a lot more expensive with larger min-buys. Indeed,
after I looked at a few websites about product offerings, it appears most
flux-cored wire solders are not halide-free. I understand that I can
basically use any materials I like as long as I test it out and can prove my
"recipe" is safe to the overall product reliability, but seemingly
halide-free is a safer way to in general.
So I am wondering:
1) Am I worrying about nothing (matching halide-free paste with halide free
solder wires)?
2) Is it really not all that common to use halide-free flux-cored wire
solders?
As always, thank you in advance...
Kevin Glidden
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
***This email, its content, and any files transmitted with it, are intended solely for the addressee(s) and may be legally privileged and/or confidential. If you are not the intended recipient, please contact the sender by return and delete the material from any computer. Any review, retransmission, dissemination, or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
