MIL-C-28809 and MIL-STD-2000A were both cancelled without replacement in
1995.  Class 3 J-STD-001 is probably the closest but 28809 has a lot of
"shalls" that might be exceptions or additions to J-STD-001 depending on
how close you want to get to it or what your customer requires.  For
example, 28809 prohibits water soluble fluxes whereas J-STD-001 allows
it at a low activity (others activity levels with testing are allowed as
well). Subtier specs for materials may be an issue, MIL-P-55110 was
required for rigid boards, MIL-F-14256 for flux,...etc.  

Regards,
Mike

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Brad Saunders
Sent: Wednesday, April 28, 2010 4:41 AM
To: [log in to unmask]
Subject: Re: [TN] MIL-P-28809

the ole "28809" actually did go to P prior to it's being replaced by
good ole MIL-STD-2000, that was thought to be to harsh/strict and it was
obsoleted without replacement,  that was when "oh-oh-one" took over.
The J-STD-001, a very nice spec has many of it's roots in the ole 28809
as does the CCA modification/rework "77" specs.
Without checking the facts, I believe that's how it went.  
Don't get me going on the WS spec and solder in vias... or or that 28809
tracked very well with the design standard MIL-STD-275, replaced by
IPC-D-275... 
  ----- Original Message ----- 
  From: Luan Nguyen<mailto:[log in to unmask]> 
  To: [log in to unmask]<mailto:[log in to unmask]> 
  Sent: Tuesday, April 27, 2010 9:11 PM
  Subject: [TN] MIL-P-28809


  Dear all,
  Would you help me to give the name of IPC standard equivalent
MIL-P-28809.

  Many thanks.


  ***************************
  Nguyen Hoang Luan
  QA Supervisor - IPC Trainer
  Spartronics VietNam Co, Ltd.
  No.3, Street No.6, VSIP
  Th An Dist., BDuong Prov., VN
  Tel: (84-650) 784 890
  Fax: (84-650) 784 891
  Mobile: 090.3.667448
  Email: [log in to unmask]<mailto:[log in to unmask]>
  ***************************


  ______________________________________________________________________
  This email has been scanned by the MessageLabs Email Security System.
  For more information please contact helpdesk at x2960 or
[log in to unmask]<mailto:[log in to unmask]> 
  ______________________________________________________________________

  ---------------------------------------------------
  Technet Mail List provided as a service by IPC using LISTSERV 15.0
  To unsubscribe, send a message to
[log in to unmask]<mailto:[log in to unmask]> with following text in
  the BODY (NOT the subject field): SIGNOFF Technet
  To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]<mailto:[log in to unmask]>: SET Technet NOMAIL or (MAIL)
  To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]<mailto:[log in to unmask]>: SET Technet Digest
  Search the archives of previous posts at:
http://listserv.ipc.org/archives<http://listserv.ipc.org/archives>
  Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16<http://www.ipc.org/cont
entpage.asp?Pageid=4.3.16> for additional information, or contact Keach
Sasamori at [log in to unmask]<mailto:[log in to unmask]> or 847-615-7100
ext.2815
  -----------------------------------------------------

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or
[log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------