Sender: |
|
X-To: |
|
Date: |
Tue, 13 Apr 2010 14:36:38 -0500 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Type: |
text/plain; charset="ISO-8859-1" |
Content-Transfer-Encoding: |
quoted-printable |
From: |
|
Parts/Attachments: |
|
|
Hi All,
I am reviewing a PCB (after just passing the CID exam Sunday), and have
found that there are no thermal reliefs on some surface mount components
that are attached to a conductive plane. I have told the designer of the
board to add them but they are worried that they will cause EMI problems do
to the inductance of the spokes. I do believe this to be an issue since we
are talking about a low current low frequency circuit (below 2MHz
fundamental and below 1.5A current), but they are still refusing to believe
my take on the matter.
So what does the community think about this problem and have there been any
good documents published about thermal reliefs causing EMI problems in low
frequency applications?
Thanks,
Toby Carrier
IPC Desingers Council CID
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
|
|