TECHNET Archives

March 2010

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Christopher Young <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Christopher Young <[log in to unmask]>
Date:
Fri, 5 Mar 2010 08:47:27 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (113 lines)
Could someone advise on what you can do if you have pagodering or
smiling on components and which ones / types are suspect.

 Chris 

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Brian Ellis
Sent: 05 March 2010 06:55
To: [log in to unmask]
Subject: Re: [TN] Conformal Coat Over No-Clean Flux

25 or so years ago, Wally's (Rubin) Wonder Flux (Multicore Xersin), 
which was claimed to be inert after soldering, had a CC variant that 
could be applied over the residues. I never tested it, mainly because 
WWF was not really the best flux in the world for oxidised leads. 
Theooretically, it sounds as if it may do the job.

Brian

Ken Bloomquist wrote:
> We have a twelve leaded, through-hole component that has to be hand
soldered
> on the circuit board. The assembly gets conformal coated with
urethane. We
> would like to hand solder these twelve leads using no-clean and then
> conformal coat the board. The component would be added as a final step
after
> the assembly has first been cleaned.
> 
> Since this is not a "total no-clean" process do you see any issues
applying
> conformal coat over these twelve no-clean solder joints?
> 
> Best regards,
> 
> KennyB
> 
> 
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please contact helpdesk at x2960 or
[log in to unmask] 
> ______________________________________________________________________
> 
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text
in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
http://listserv.ipc.org/archives
> Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
> -----------------------------------------------------
> 

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or
[log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------

The information contained within this e-mail and any files attached to this e-mail is private and in addition may include commercially sensitive information. The contents of this e-mail are for the intended recipient only and therefore if you wish to disclose the information contained within this e-mail or attached files, please contact the sender prior to any such disclosure. 
If you are not the intended recipient, any disclosure, copying or distribution is prohibited. Please also contact the sender and inform them of the error and delete the e-mail, including any attached files from your system. 
EADS Defence and Security Systems Limited 
Registered Office : Quadrant House, Celtic Springs, Coedkernew, Newport , NP10 8FZ 
Company No: 04191036 
http://www.eadsdsuk.com
The information contained within this e-mail and any files attached to this e-mail is private and in addition may include commercially sensitive information. The contents of this e-mail are for the intended recipient only and therefore if you wish to disclose the information contained within this e-mail or attached files, please contact the sender prior to any such disclosure. 
If you are not the intended recipient, any disclosure, copying or distribution is prohibited. Please also contact the sender and inform them of the error and delete the e-mail, including any attached files from your system. 
EADS Defence and Security Systems Limited 
Registered Office : Quadrant House, Celtic Springs, Coedkernew, Newport , NP10 8FZ 
Company No: 04191036 
http://www.eadsdsuk.com

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2