TECHNET Archives

March 2010

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
C H Huang <[log in to unmask]>
Reply To:
Date:
Wed, 17 Mar 2010 10:14:01 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (77 lines)
Hi Leland,
Depends on the size and thickness of your boards, you may need to 
consider center board support.
May also want to consider different cooling options if you need more 
aggressive ramp down rate.

CH

On 3/17/2010 7:34 AM, Leland Woodall wrote:
> Technetters,
>
> We're preparing to purchase eight to ten forced convection reflow ovens
> to replace equipment we currently have.  We also have plans to attend
> APEX to check out the varieties available and their features.
>
> Being a Quality guy, I'm concerned about items that include:
>
> Ability to hold temp within 1 to 2 degrees C
> Flux management systems
> Nitrogen control, with expected levels of 50 to 100 O2 PPM (max 500 PPM)
> Oxygen analyzer type, sampling rate, etc.
> Seals, exhaust system
> 8 to 10 zones
> Board drop sensors
> Auto width adjust
> Ability to maintain parallelism from end to end with constant use
> Ease of maintenance
> Power consumption, cost of ownership
>
> I know that I'm missing some important items.  Will those that have a
> few minutes please add to my list and elaborate upon what I should
> investigate?  I'd especially like to hear about personal experiences
> with critical control designs (what's good, and what should be avoided
> with all costs).
>
> Many thanks, as always!
>
> Leland
>
>
>
>
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
> -----------------------------------------------------
> .
>
>    


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2