Dave,
This may worthwhile to try. Print solderpaste and dispense a lot of tacky flux on the site, over the printed solderpaste. Place component and send it thru reflow. We have had instances where we came out with a lot of (unwanted) flux voids when a lot of tacky flux was added during BGA rework.
Amol
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of David D. Hillman
Sent: Thursday, February 25, 2010 10:43 AM
To: [log in to unmask]
Subject: [TN] Suggestions on Making BGA Voids
Hi gang! Ok, I have a fairly crazy request for suggestions on how to make
BGA voids. First here is the background - Dr. David Bernard (Dage), Dave
Adams (Rockwell Collins) and I are working on a collaborative project to
investigate the thermal cycle solder joint integrity of BGA components. We
are attempting to produce data which the IPC JSTD 001 committee can use to
revise the 25% maximum void criteria. Despite public rumor, this current
IPC JSTD 001 void requirement is based on actual IPC Class 3 field
equipment results submitted to the committee several years ago. However,
BGAs have changed in both size, pitch and solderball diameter since the
creation of the void criteria thus the reason for collaborative project.
We have a test vehicle which contains BGAs at 0.5mm, 0.8mm and 1.0mm pitch
with each having a corresponding larger solderball diameter. We have put
uvias in the BGA pads to "create" voiding. Great plan, figured we had it
made- however, after running the test vehicles thru a standard reflow
process (this effort is focused on tin/lead right now) we find that we
have an average void size in the range of 0-5%! My production process
folks are very proud of that result but it doesn't do our voiding
investigation much good (you can imagine the look I got when I told them
they didn't make enough voids greater than 25%). I know that a number of
the Technet community have tried to accomplish this voiding task with only
mild success (i.e. Bev Christian, Martin Wickham, etc.).
My Technet request is - do you have any suggestions on how to increase the
solderball void size without causing a biased negative impact on the
solder joint quality? I can obviously make some huge solderball voids
(such as pouring Doug's Diet Mt. Dew on the test vehicles) but the overall
quality of the solder joint would not be representative of the real world
product.
Thanks in advance
Dave Hillman
Rockwell Collins
[log in to unmask]
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
WARNING: Export Control
This document may contain technical data within the definition of the
International Traffic in Arms Regulations (ITAR), and subject to the Export
Control Laws of the U.S. Government. Transfer of such data by any means to a
foreign person, whether in the United States or abroad, without proper export
authorization or other approval from the U.S. Department of State is
prohibited.
CONFIDENTIALITY NOTICE:
This e-mail, and any attachments, is for the sole use of the intended
recipient(s) and may contain information that is confidential and
protected from disclosure under the law. Any unauthorized review, use,
disclosure, or distribution is prohibited. If you are not the intended
recipient, please contact the sender by reply e-mail, and delete/destroy
all copies of the original message and attachments.
Thank you.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|