Don't forget about belt (i.e. lubrication) maintenance.

Lee Whiteman, PMP
Senior Member Engineering Staff
L-3 Communications East
Telephone: (856) 338-3508
FAX: (856) 338-2906
E-Mail: [log in to unmask]
 
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Jerry Dengler
Sent: Wednesday, March 17, 2010 2:07 PM
To: [log in to unmask]
Subject: Re: [TN] Reflow Oven Comparison and Qualification

Hi Leland,

From a maintenance stand point:

Check on blower life and heater life.
Ease of changing both.

Get references for current users that have reached the claimed life
expectance of these items and verify manufacturers claims.

Jerry

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Werner Engelmaier
Sent: Wednesday, March 17, 2010 1:57 PM
To: [log in to unmask]
Subject: Re: [TN] Reflow Oven Comparison and Qualification

 Hi CH,
You do not want 'aggressive' ramp down rates-these cause pad cratering
among other things.

 Werner


 

 

-----Original Message-----
From: C H Huang <[log in to unmask]>
To: [log in to unmask]
Sent: Wed, Mar 17, 2010 1:14 pm
Subject: Re: [TN] Reflow Oven Comparison and Qualification


Hi Leland,
Depends on the size and thickness of your boards, you may need to
consider center board support. 
May also want to consider different cooling options if you need more
aggressive ramp down rate. 
 
CH 
 
On 3/17/2010 7:34 AM, Leland Woodall wrote: 
> Technetters,
> 
> We're preparing to purchase eight to ten forced convection reflow 
> ovens to replace equipment we currently have.  We also have plans to 
> attend APEX to check out the varieties available and their features.
> 
> Being a Quality guy, I'm concerned about items that include: 
> 
> Ability to hold temp within 1 to 2 degrees C Flux management systems 
> Nitrogen control, with expected levels of 50 to 100 O2 PPM (max 500 
> PPM) Oxygen analyzer type, sampling rate, etc.
> Seals, exhaust system
> 8 to 10 zones
> Board drop sensors
> Auto width adjust
> Ability to maintain parallelism from end to end with constant use Ease

> of maintenance Power consumption, cost of ownership
> 
> I know that I'm missing some important items.  Will those that have a 
> few minutes please add to my list and elaborate upon what I should 
> investigate?  I'd especially like to hear about personal experiences 
> with critical control designs (what's good, and what should be avoided

> with all costs).
> 
> Many thanks, as always! 
> 
> Leland
> 
> 
> 
> 
> 
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System. 
> For more information please contact helpdesk at x2960 or 
> [log in to unmask] 
> ______________________________________________________________________
> 
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0 To 
> unsubscribe, send a message to [log in to unmask] with following text in

> the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt 
> or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET

> Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the 
> posts: send e-mail to [log in to unmask]: SET Technet Digest Search the 
> archives of previous posts at: http://listserv.ipc.org/archives Please

> visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 
> for additional information, or contact Keach Sasamori at 
> [log in to unmask] or 847-615-7100 ext.2815
> -----------------------------------------------------
> . 
> 
>     
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System. 
For more information please contact helpdesk at x2960 or
[log in to unmask]
______________________________________________________________________ 
 
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
----------------------------------------------------- 

 

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or
[log in to unmask]
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or
[log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------