Subject: | |
From: | |
Reply To: | |
Date: | Tue, 9 Mar 2010 07:24:58 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I agree completely. With a thinner board such as this, localized stresses could
cause not only intermiitent connections with the contact pins, you could also
be stressing components and solder joints.
Blair
On Mon, 8 Mar 2010 09:07:17 -0800, John Burke <[log in to unmask]>
wrote:
>It depends........8-)
>
>Push down fixtures need to be carefully designed in order to balance the
>localized probe forces. If they are badly designed the results can indeed
>have adverse impacts on reliability.
>
>
>John Burke
>(408) 515 4992
>
>
>-----Original Message-----
>From: TechNet [mailto:[log in to unmask]] On Behalf Of Gobinathan Athimolom
>Sent: Sunday, March 07, 2010 11:37 PM
>To: [log in to unmask]
>Subject: [TN] PCBA Test
>
>Hello Technet,
>
>
>I'm looking forward your invaluable input concerning ICT test on PCB that
>has thickness of 1.2mm (0.0472") in total. What are the issues that we might
>run into if the PCB (thickness 1.2mm) is subjected to ICT using press down
>fixture instead of vacuum fixture? In term of reliability and repeatability.
>
>
>Thanks,
>
>Gobi
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|