Content-Type: |
text/plain |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Thu, 4 Mar 2010 11:36:02 -0800 |
MIME-Version: |
1.0 |
X-To: |
|
Reply-To: |
|
Parts/Attachments: |
|
|
Paul,
It's the parts that cannot go through the wash.
KennyB
_____
From: Paul Edwards [mailto:[log in to unmask]]
Sent: Thursday, March 04, 2010 11:45 AM
To: TechNet E-Mail Forum; Ken Bloomquist
Subject: RE: [TN] Conformal Coat Over No-Clean Flux
BM_BEGINKen,
Is it the parts that can't go through the wash or you can't clean No-clean
off in your in-line?
Paul
Paul Edwards
Surface Art Engineering
-----Original Message-----
From: TechNet [ <mailto:[log in to unmask]> mailto:[log in to unmask]] On Behalf
Of Ken Bloomquist
Sent: Thursday, March 04, 2010 11:21 AM
To: [log in to unmask]
Subject: Re: [TN] Conformal Coat Over No-Clean Flux
This dialogue is great so far but one big part of my question is missing. I
cannot clean these solder joints with anything except spot cleaning. They
cannot go through our in-line wash. My understanding is that spot (bench)
cleaning is never a good idea as a final clean.
I understand that testing is required and I'm prepared to do that but just
wanted to get a feel for successes other people have had coating urethane
over no-clean.
By the way Inge, I'm not trying to cut corners by putting on no-clean pants
;-)
Thanks,
KennyB
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|