TECHNET Archives

February 2010

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Ken Bloomquist <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Ken Bloomquist <[log in to unmask]>
Date:
Thu, 18 Feb 2010 07:55:47 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (42 lines)
Good answer Scott, I think what you mentioned is probably the best one out
there. I'll have to remember that the next time I need to measure something
like that.

KennyB
 
-----Original Message-----
From: Post, Scott E [mailto:[log in to unmask]] 
Sent: Wednesday, February 17, 2010 4:44 AM
To: [log in to unmask]
Subject: Re: [TN] Best way to measure "actual" themal pad compression

 
What about having the thermal pad in place, but cut a thin strip out of
it for the Plastigage?  Plastigage is like really, really small diameter
dental floss, so he wouldn't have to remove much of the thermal pad to
make room for it so the thermal pad would still dominate the situation.

Scott Post 
P.O.U. 0000-001E-0CTC
2151 E. Lincoln Road 
Kokomo, Indiana    46904-9005 
765-451-2983 (Phone) 
765-451-0287 (FAX) 



______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2