IngeMar, did you check the reflow instruction from the vendor? Some of them may not be leadfree.
--------------------------
Sent using BlackBerry
----- Original Message -----
From: TechNet <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Sent: Tue Feb 02 20:49:19 2010
Subject: Re: [TN] track lifting
It would be helpful to know the size of the device, I/O count, pitch and
the location of the "lifts" (corner or edge) and the specifics of the
substrates, package and mounting along with process specifics for starters. Also
is this a one time event or a recurring one? Right now it is just a
curiosity
As Werner has alluded with his comment that the picture is "less than
illuminating", it seems there are still "other shoes still need to drop".
Kind regards,
Joe
In a message dated 2/2/2010 5:13:11 P.M. Pacific Standard Time,
[log in to unmask] writes:
Hi Steve & All,
A 'mechanical hit' would not cause this. While the pic is less than fully
illuminating, I have seen similar 'buckle ups' with Pb-free
solders/soldering before.
We need to remember, that SAC is 40% stiffer than SnPb, has a higher yield
strength and creeps about a factor of 50 slower—it thus, becomes a
mechanically significant layer with a higher CTE than Cu and the PCB(x,y).
Werner
-----Original Message-----
From: Steve Gregory <[log in to unmask]>
To: [log in to unmask]
Sent: Tue, Feb 2, 2010 6:10 pm
Subject: Re: [TN] track lifting
Hi Pearl,
Here's your picture:
http://stevezeva.homestead.com/files/Track_Lifting.JPG
What I see in the picture is that BGA (it is a BGA isn't it?) was almost
ripped-off the board somehow.
The traces are stretched and the soldermask has been torn up from the
board.
The root cause is that something mechanically hit the BGA and ripped up
pads
and traces. Is there any other marks on the BGA?
Steve
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of pearl petras
Sent: Tuesday, February 02, 2010 5:13 PM
To: [log in to unmask]
Subject: [TN] track lifting
While we wait for IPC to set up a picture site, could I impose on Steve to
post another picture?
Any comments as to what could possibly be the root causes of this is much
appreciated.
Thanks so much
__________________________________________________________________
Yahoo! Canada Toolbar: Search from anywhere on the web, and bookmark your
favourite sites. Download it now
http://ca.toolbar.yahoo.com.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------------------------
This transmission (including any attachments) may contain confidential information, privileged material (including material protected by the solicitor-client or other applicable privileges), or constitute non-public information. Any use of this information by anyone other than the intended recipient is prohibited. If you have received this transmission in error, please immediately reply to the sender and delete this information from your system. Use, dissemination, distribution, or reproduction of this transmission by unintended recipients is not authorized and may be unlawful.
|