Subject: | |
From: | |
Reply To: | |
Date: | Mon, 8 Feb 2010 09:32:25 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Vigon 200 works fine, but remember the high pH (can be as much as 11). Good rinsing is a must.
/Inge
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Brian Ellis
Sent: måndag 8 februari 2010 07:33
To: [log in to unmask]
Subject: Re: [TN] Flux Cleaning
The more the flux is 'cooked', the harder it is to remove. As you apparently use a rosin-based flux, it may become very difficult. It is not helpful to say you use an ultrasonic cleaner without telling us your soldering time/temp profile, cleaning products and procedure, ultrasound data etc.
I suggest you consult your flux manufacturer for advice on how HIS flux residues may be best removed. For cleaning to wire-bonding standards, you will probably have to go to more than a solvent, such as Vigon or Kyzen products, if the flux maker cannot help.
There is no 'best' product.
Brian
jonathan noquil wrote:
> Hi All
> What is the best flux cleaning agent that can effectively remove flux
> on ENiAu bond pads?
> We solder a copper strap on the silicon with PbSn5 at 350 degc
> temperature, the flux contaminates the bonding pads.
> Paste is from Heraues. We used an ultrasonic cleaning equipment.
> During Au wirebonding, we have lots of bond off occurences? We tried
> to do FTIR on the surface and found some traces of that resin contamination.
>
> Is the flux difficult to remove with flux cleaning agent when it was
> reflowed at high temperature?
>
>
> Thanks
>
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
> unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt
> or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET
> Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
> posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
> archives of previous posts at: http://listserv.ipc.org/archives Please
> visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
> for additional information, or contact Keach Sasamori at
> [log in to unmask] or 847-615-7100 ext.2815
> -----------------------------------------------------
>
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|