TECHNET Archives

November 2009

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Victor Hernandez <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, [log in to unmask]
Date:
Wed, 25 Nov 2009 06:35:06 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (693 lines)
Way to go~!   We too use this non destructive method plus mapping.
(Fischer scope & Oxford-X-strata)

Victor, 

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Wenger, George M.
Sent: Tuesday, November 24, 2009 8:20 PM
To: [log in to unmask]
Subject: Re: [TN] solder fracture solderable?

Bob,



Going back many years in my previous company we used lots of HASL for
many telecommunications circuit packs.  We also had an extremely large
captive PCB board shop.  We also developed our own internal thickness
specification primarily because we felt the IPC "coverage and
solderable" didn't provide a useful specification.  It was easy to do
incoming inspection on HASL boards.  If the copper features on the board
were "covered" (i.e., the features changed from copper color to tin
color) that told us the boards had "coverage".  To determine if the
boards were "solderable" you would need to do a destructive
solderability test or actually solder the boards.  We felt we needed a
non-destructive test to know if features would be solderable before we
actually soldered to them.  We chose to use XRF as a non-contact,
non-destructive measurement tool.  We also used a Fischer XRF with a
small diameter (3mil dia.) collimator so that we could measure the HASL
thickness even on small size features.  Our internal SnPb HASL thickness
specification was:



Minimum: >/= 60u"

5th Percentile: >/= 100u"

95th Percentile: </= 1000u"

Maximum: </= 2400u"



This specification worked well for us for many years.  However, when our
products began to use lots of fine pitch surface mount components we had
a difficult time trying to keep the HASL surface both flat enough for
fine pitch and solderable enough.  We used to joke that HASL can be
"flat or solderable" the problem was you needed to pick which attribute
you wanted because you couldn't have both at the same time.  Joking a
side, this difficulty is the reason products began to migrate away from
HASL to other final surface finishes.  I've attached a file with four
slides that illustrate the type of thickness variation we saw on QFP
features on SnPb HASL boards.



You'll be able to see the file but since TN strips off attachments I've
copied Steve in case there are others on TN who might want to see the
slides.







Regards,



George



George M. Wenger



Andrew Wireless Solutions



Senior Principal FMA / Reliability Engineer



40 Technology Drive, Warren, NJ 07059



(908) 546-4531 [Office]  (732) 309-8964 [Mobile]



[log in to unmask]



-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Chris Mahanna
Sent: Tuesday, November 24, 2009 11:41 AM
To: [log in to unmask]
Subject: Re: [TN] solder fracture solderable?



Bob,

Right or wrong, HASL is a "coverage and solderable" finish.  Unless
you're Rockwell Collins you won't be able to enforce the thickness (poor
RCPC).

Solderable HASL isn't necessarily measurable in cross section.  It
depends upon how flat the mount preparation is-- and it's hard to use
the XRF where the HASL usually gets thin (like the knees of a PTH).

Solderability (ideally including wetting balance) is your best bet.

Chris



Chris Mahanna

Robisan Laboratory



-----Original Message-----

From: TechNet [mailto:[log in to unmask]] On Behalf Of Robert Kondner

Sent: Tuesday, November 24, 2009 11:04 AM

To: [log in to unmask]

Subject: Re: [TN] solder fracture solderable?



Dave,



 Thanks you.



 Any quick easy way for a lowly engineer to measure this thickness? Is
it obvious by eye and a simple lens or optical scope? Flatness is not an
issue.



 Has anyone seen photos of Bad HASL that I can use for reference?



Thanks,

Bob Kondner



-----Original Message-----

From: TechNet [mailto:[log in to unmask]] On Behalf Of David D. Hillman

Sent: Tuesday, November 24, 2009 10:55 AM

To: [log in to unmask]

Subject: Re: [TN] solder fracture solderable?



Hi Bob - we typically require 900 +/- 300 uinches for HASL thickness.
Good solderability life and reasonable flatness at those values.



Dave Hillman

Rockwell Collins

[log in to unmask]









Robert Kondner <[log in to unmask]> Sent by: TechNet
<[log in to unmask]>

11/24/2009 09:52 AM

Please respond to

[log in to unmask]





To

[log in to unmask]

cc



Subject

Re: [TN] solder fracture solderable?













Hi,



 Can anyone tell me what is involved to do a quick verification of HASL

solder coating thickness?



 Any number on minimal coating required to prevent under metal
oxidation?



Thanks,

Bob Kondner







-----Original Message-----

From: TechNet [mailto:[log in to unmask]] On Behalf Of Lee Whiteman

Sent: Tuesday, November 24, 2009 10:26 AM

To: [log in to unmask]

Subject: Re: [TN] solder fracture solderable?



Blair,



Q1: How do those of us who purchase and use ENIG boards know that we are

getting good product? First, we clearly provide our requirements to our

board suppliers. Second, we inspect panels and coupons per IPC-6012. At

time, we would perform XRF analysis to confirm the thickness of the gold

and nickel layers.



Q2: Continual auditing of the supplier? We have performed off-site

(Incoming Inspection) and on-site audits of our suppliers.



Q3; SPC data for each shipment? While we don't require it, we have

access to their SPC data if there is a problem with the shipment.



Hope this helps. Good Luck.



Lee Whiteman, PMP

Senior Member Engineering Staff

L-3 Communications East

Telephone: (856) 338-3508

FAX: (856) 338-2906

E-Mail: [log in to unmask]



-----Original Message-----

From: TechNet [mailto:[log in to unmask]] On Behalf Of Blair Hogg

Sent: Tuesday, November 24, 2009 10:00 AM

To: [log in to unmask]

Subject: Re: [TN] solder fracture solderable?



How do those of us who purchase and use ENIG boards know that we are

getting good product? Continual auditing of the supplier? SPC data for

each

shipment?



If you find a reliable source, how do you know they stay reliable? Or do

you

find a shipment comes in one day and you build a hundred boards with

high

failure rate?



Blair



On Mon, 23 Nov 2009 23:50:07 +0100, Inge <[log in to unmask]>

wrote:



>...and responsible operators....

>Inge

>

>

>----- Original Message -----

>From: "Joyce Koo" <[log in to unmask]>

>To: <[log in to unmask]>

>Sent: Monday, November 23, 2009 9:22 PM

>Subject: Re: [TN] solder fracture solderable?

>

>

>Bath chemistry and pH and temp.

>--------------------------

>Sent using BlackBerry

>

>

>----- Original Message -----

>From: TechNet <[log in to unmask]>

>To: [log in to unmask] <[log in to unmask]>

>Sent: Mon Nov 23 15:15:04 2009

>Subject: Re: [TN] solder fracture solderable?

>

>

> Hi Bob,

>No, you read it correctly, and put your finger squarely in the problem.

>Werner

>

>

>-----Original Message-----

>From: Robert Kondner <[log in to unmask]>

>To: [log in to unmask]

>Sent: Mon, Nov 23, 2009 3:10 pm

>Subject: Re: [TN] solder fracture solderable?

>

>

>Hi,

>

> The other week there was talk about ENIG vs HASL so I have been

searching

>around the web for ENIG info. I read a number of items.

>

> I recall reading that a phosphorus (in nickel) content of > 10% (I

think it

>was %) was required to control the Immersion Gold thickness and better

>control corrosion resistance. Wow, 10% sounds high but I guess that is

>right.

>

>  The photos show a P+ layer at the failed interface. Does that imply

>increasing P is a problem at making "Strong" soldered connections?

>

>  How does a lowly PCB user monitor this kind of parameter of

phosphorus so

>it is not too much or not too little?

>

>  Or did I misread the entire scenario?

>

>Thanks,

>Bob Kondner

>



---------------------------------------------------

Technet Mail List provided as a service by IPC using LISTSERV 15.0

To unsubscribe, send a message to [log in to unmask] with following text

in

the BODY (NOT the subject field): SIGNOFF Technet

To temporarily halt or (re-start) delivery of Technet send e-mail to

[log in to unmask]: SET Technet NOMAIL or (MAIL)

To receive ONE mailing per day of all the posts: send e-mail to

[log in to unmask]: SET Technet Digest

Search the archives of previous posts at:

http://listserv.ipc.org/archives

Please visit IPC web site

http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional

information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100

ext.2815

-----------------------------------------------------



---------------------------------------------------

Technet Mail List provided as a service by IPC using LISTSERV 15.0

To unsubscribe, send a message to [log in to unmask] with following text
in

the BODY (NOT the subject field): SIGNOFF Technet

To temporarily halt or (re-start) delivery of Technet send e-mail to

[log in to unmask]: SET Technet NOMAIL or (MAIL)

To receive ONE mailing per day of all the posts: send e-mail to

[log in to unmask]: SET Technet Digest

Search the archives of previous posts at:
http://listserv.ipc.org/archives

Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16

for additional information, or contact Keach Sasamori at [log in to unmask]
or

847-615-7100 ext.2815

-----------------------------------------------------



---------------------------------------------------

Technet Mail List provided as a service by IPC using LISTSERV 15.0

To unsubscribe, send a message to [log in to unmask] with following text
in

the BODY (NOT the subject field): SIGNOFF Technet

To temporarily halt or (re-start) delivery of Technet send e-mail to

[log in to unmask]: SET Technet NOMAIL or (MAIL)

To receive ONE mailing per day of all the posts: send e-mail to

[log in to unmask]: SET Technet Digest

Search the archives of previous posts at:
http://listserv.ipc.org/archives

Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16

for additional information, or contact Keach Sasamori at [log in to unmask]
or

847-615-7100 ext.2815

-----------------------------------------------------





---------------------------------------------------

Technet Mail List provided as a service by IPC using LISTSERV 15.0

To unsubscribe, send a message to [log in to unmask] with following text
in

the BODY (NOT the subject field): SIGNOFF Technet

To temporarily halt or (re-start) delivery of Technet send e-mail to

[log in to unmask]: SET Technet NOMAIL or (MAIL)

To receive ONE mailing per day of all the posts: send e-mail to

[log in to unmask]: SET Technet Digest

Search the archives of previous posts at:
http://listserv.ipc.org/archives

Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16

for additional information, or contact Keach Sasamori at [log in to unmask]
or

847-615-7100 ext.2815

-----------------------------------------------------



---------------------------------------------------

Technet Mail List provided as a service by IPC using LISTSERV 15.0

To unsubscribe, send a message to [log in to unmask] with following text
in

the BODY (NOT the subject field): SIGNOFF Technet

To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)

To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest

Search the archives of previous posts at:
http://listserv.ipc.org/archives

Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815

-----------------------------------------------------



---------------------------------------------------

Technet Mail List provided as a service by IPC using LISTSERV 15.0

To unsubscribe, send a message to [log in to unmask] with following text
in

the BODY (NOT the subject field): SIGNOFF Technet

To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)

To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest

Search the archives of previous posts at:
http://listserv.ipc.org/archives

Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815

-----------------------------------------------------



---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2