Subject: | |
From: | |
Reply To: | (Combined Forum of D-33a and 7-31a Subcommittees) |
Date: | Fri, 6 Nov 2009 09:54:40 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Thanks Fritz - I'd use that one if I could - it would be fun! - but I'm supposed to use only images of bare boards prior to assembly for the A-600.
Best Regards,
John Perry
Technical Project Manager
IPC - Association Connecting Electronics Industries(r)
3000 Lakeside Drive # 309S
Bannockburn, IL 60015-1249 USA
+1 847-597-2818 (tel)
+1 847-615-7105 (fax)
+1 847-615-7100 (Main)
[log in to unmask]
www.ipc.org
-----Original Message-----
From: IPC-600-6012 [mailto:[log in to unmask]] On Behalf Of Francis Byle
Sent: Thursday, November 05, 2009 6:13 PM
To: Listserv IPC-600-6012
Subject: Re: [IPC-600-6012] IPC-A-600 Revision H Imagery - Pits and Voids
Nope, but I've got the king of all "unacceptable" pits. Use it if you wish :-)
Regards,
Fritz
-----Original Message-----
From: IPC-600-6012 [mailto:[log in to unmask]] On Behalf Of John Perry
Sent: Thursday, November 05, 2009 5:29 PM
To: [log in to unmask]
Subject: [IPC-600-6012] IPC-A-600 Revision H Imagery - Pits and Voids
Hi All,
Most of you are familiar with the ongoing effort to resolve comments to the Final Draft circulation of IPC-6012C, and while that is nearing completion, I want to get started on addressing comments received to the Final Draft circulation of IPC-A-600H through this task group e-mail forum.
Section 2.2.4 of the IPC-A-600H Final Draft (located at http://www.ipc.org/CommitteeDetail.aspx?Committee=7-31A under "Drafts") addresses pits and voids in printed board base material.
Figure 224c under "Acceptable - Class 1, 2, 3" is new to Revision H, but received a number of comments indicating that the figure is confusing - it's not clear what the yellow arrow is pointing to and pits and voids are not evident.
Does anyone have a better photograph that shows an acceptable degree of pits and voids on a printed board surface?
Thanks,
John Perry
Technical Project Manager
IPC - Association Connecting Electronics Industries(r) 3000 Lakeside Drive # 309S Bannockburn, IL 60015-1249 USA
+1 847-597-2818 (tel)
+1 847-615-7105 (fax)
+1 847-615-7100 (Main)
[log in to unmask]
www.ipc.org
|
|
|