 
| Sender: |
|
| X-To: |
|
| Date: |
Wed, 4 Nov 2009 10:42:48 -0800 |
| Reply-To: |
|
| Content-Transfer-Encoding: |
7bit |
| Subject: |
|
| From: |
|
| Content-Type: |
text/plain; charset="us-ascii" |
| In-Reply-To: |
|
| Organization: |
Enigma Interconnect Inc. |
| MIME-Version: |
1.0 |
| Parts/Attachments: |
|
|
Bill,
Every fabricator will have their own mix of 'standard' stocked materials and
thus will likely have their own internal 'standard' for a build when none is
specified in the fabrication details but from shop to shop there is no
standard.
John Parsons
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Brooks,
Bill
Sent: Wednesday, November 04, 2009 10:20 AM
To: [log in to unmask]
Subject: [DC] Standard construction for a 4 layer board...
I need to ask the designers and particularly the manufacturers a
question.
IS there a standard construction for a 4 layer FR4 board?
What thickness core and what prepreg arrangement would be used if I
asked for a IPC 4101/26 material to be used without specifying the
stackup thicknesses?
Best regards,
Bill Brooks | Datron World Communications, Inc.
PCB Designer/Engineer | Office: 760-602-7004| Fax: 760-597-3777 |
[log in to unmask]
1808 Aston Avenue, Suite 230, Carlsbad, CA 92008 | www.dtwc.com
Performance You Require. Value You ExpectTM
----------------------------------------------------------------------------
-----
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
|
|
