TECHNET Archives

September 2009

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
Date:
Thu, 10 Sep 2009 18:07:13 +0200
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, Inge <[log in to unmask]>
Subject:
MIME-Version:
1.0
Content-Transfer-Encoding:
7bit
Content-Type:
text/plain; format=flowed; charset="iso-8859-1"; reply-type=original
From:
Parts/Attachments:
text/plain (302 lines)
Also a possible occurence,  Blackberry.
But it seems as I will never know.
/Inge

----- Original Message ----- 
From: "Joyce Koo" <[log in to unmask]>
To: <[log in to unmask]>; <[log in to unmask]>
Sent: Thursday, September 10, 2009 5:48 PM
Subject: Re: [TN] Need clever comments


The copper might be from the IM tin bath?  If it is too old, and\or ph not 
adjusted properly?  Or the mask was not cured prior to tin process?
--------------------------
Sent using BlackBerry


----- Original Message -----
From: TechNet <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Sent: Thu Sep 10 11:40:09 2009
Subject: Re: [TN] Need clever comments

Good idea, but presupposes that someone is not brainier than a polliwog.Can
that be?
/Inge

----- Original Message ----- 
From: "Steven Creswick" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, September 10, 2009 5:21 PM
Subject: Re: [TN] Need clever comments


> Inge,
>
> Could the copper 'contamination' have been a transfer of copper caused by
> someone placing a non-masked board, with exposed copper, in contact with
> the
> surface of your board's solder mask?
>
> Maybe during shipment, etc.?
>
> Steve C
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Inge
> Sent: Thursday, September 10, 2009 11:11 AM
> To: [log in to unmask]
> Subject: Re: [TN] Need clever comments
>
> Jack &Paul, FYI.
>
> Today I had a close look at the cross sections. What I found was this:
>
> 1. The Tin plating was done AFTER solder mask (Jack was right)
> 2. The solder mask was very uneven, thickness between 5um and 25 um.
> 3. Despite the corrupted surface, the solder mask is homogenous, no
> vertical
>
> cracks found.
> 4. The copper that I found earlier on top of the conductor, i.e. on the
> solder mask, that copper had no connection with the conductor copper.
> Which
>
> means that these contaminations had NOT migrated through the solder mask.
> 5. I can still not figure out from where the copper contaminations come.
>
> So, all that remains is the question about the copper contaminations tha
> embedded in the very surface of the solder mask. I have to adjust my
> report
> and resend it to our customer and the board maker.
>
> Thanks to your critisism,  I can now redo the analys, starting from a more
> correct standpoint.
>
> Your are great!
>
> /Inge
>
>
>
>
> ----- Original Message ----- 
> From: "Inge" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, September 09, 2009 8:09 PM
> Subject: Re: [TN] Need clever comments
>
>
>> Jack,
>>
>> SMOBC is the common industrial standard, as you pointed out, however,
>> there ARE some fabricators that apply the solder mask after Tin/Lead-ing
>> the copper traces. The later method has an obvioius disadvantage, see
>> below quoted from an article written by US Environmental Agency:
>>
>>  " This method predominates for several reasons. Copper is a surface that
>> lends itself to rigorous cleaning, which is essential for solder mask
>> adhesion. Tin-lead under solder mask will liquefy during soldering and
>> may
>
>> cause the mask to blister and peel. The hot air solder leveling process
>> generally produces less waste water and introduces less lead into the
>> waste water stream than tin-lead plating and reflow. Despite these
>> advantages, well-known disadvantages also exist. The shelf-life of hot
>> air
>
>> solder leveled circuits is short and solder thicknesses on pads and hole
>> barrels is notoriously difficult to control. For these reasons, a small
>> minority of specifications continue to call for tin-lead plate and reflow
>> or other alternati air solder leveling, nomenclature screening, and
>> finally, gold edge plating if necessary. "
>>
>> I think that is what happened to our boards....." cause the mask to
>> blister and peel"...
>>
>> Another paper describes Tin under solder mask this way:
>>
>> " Facility F initially was concerned with the soldermask breakdown where
>> the Tin leaches underneath the soldermask....etc"
>>
>> Quoted from  EPA (United States Environmental Protection Agency.
>>
>> When I started the investigation (had just some hours to spend before
>> reporting the result!), I was fully convinced that these boards were
>> SMOBC, but our customer said they used tinning before soldermask. I have
>> asked for a confirmation from the board fabricator, but got no answer.
>>
>> Thanks for your comment, good critics.
>>
>> Inge
>>
>>
>> ----- Original Message ----- 
>> From: "Jack Olson" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Wednesday, September 09, 2009 4:44 PM
>> Subject: [TN] Need clever comments
>>
>>
>>>I know I'm late to the game, but I can't resist asking this question:
>>>
>>>>From my experience, the tin is applied AFTER soldermask, so
>>> you have mask over bare copper, and tin over exposed copper.
>>>
>>> The tin in PHOTO2.JPG in the exposed area looks beautiful,
>>> so isn't the question (ignoring the whiskers for the moment)
>>> "How can bare copper erupt through the mask?"
>>>
>>> Unless I missed one of your previous posts, it seems to me that
>>> any speculation about copper poking through the tin finish is
>>> irrelevant. I'm only addressing Question 2 below, but you mentioned
>>> introducing a nickel barrier, and that will not be plated under the mask
>>> either, will it? only on exposed circuitry...
>>>
>>> just wondering,
>>> Jack
>>>
>>>
>>> -=-=-=-
>>>
>>>  *Subject:* Need clever comments *From:* Hernefjord Ingemar <
>>> [log in to unmask]> *Reply-To:* TechNet E-Mail Forum <
>>> [log in to unmask]>, Hernefjord Ingemar <[log in to unmask]>
>>> *
>>> Date:* Mon, 7 Sep 2009 13:21:54 +0200 *Content-Type:* text/plain
>>>
>>>
>>> Hi all, need some professional backup regarding MIL quality boards.
>>>
>>> Objects: FR-4 Class III double-sided multi-layer boards, populated
>>> with SOICS, BGAs,and a lot of passive components.
>>>
>>> Observation 1 : the non soldered board have lots of Tin whiskers on
>>> inside of the PTH barrel. My thought is this: if whiskers can grow
>>> long before the board is assembled, then ain't it likely that even CAF
>>> can be generated?  See photo 1.
>>>
>>> Observation 2:  Copper has somehow penetrated the solder mask. This
>>> can be found everywhere along the conductor traces. You need a very
>>> good light microscope and a SEM to see it. See photo 2.
>>>
>>> Board data: Copper with 0.8 micrometer Immersion Tin. No nickel
>>> barrier. Solder mask thickness not specified.
>>>
>>> Application: Typical MIL-883 environment
>>>
>>> Q1: What is your opinion about that thin Tin directly on copper? I
>>> dislike the concept. Copper is very mobile at high temperatures, and
>>> combined with humidity, there can be leakage currents and corrosion
>>> issues. Even if the boards are CCd, there is a risk with copper .
>>>
>>> Q2: I gave  the advice to introduce a nickel barrier, but our customer
>>> claimed, that they can't because of pressfit connectors and pressfit
>>> test pins on the board. Furthermore, they had heard that one cannot
>>> have nickel platings when pressfitting, because the nickel will crack
>>> and oxidize and cause electrical disfunction. Is this your opinion
>>> too? Are there any relevant testing behind such statements?
>>>
>>> Thanks in advance
>>>
>>> Inge
>>>
>>> ---------------------------------------------------
>>> Technet Mail List provided as a service by IPC using LISTSERV 15.0
>>> To unsubscribe, send a message to [log in to unmask] with following text
>>> in
>>> the BODY (NOT the subject field): SIGNOFF Technet
>>> To temporarily halt or (re-start) delivery of Technet send e-mail to
>>> [log in to unmask]: SET Technet NOMAIL or (MAIL)
>>> To receive ONE mailing per day of all the posts: send e-mail to
>>> [log in to unmask]: SET Technet Digest
>>> Search the archives of previous posts at:
>>> http://listserv.ipc.org/archives
>>> Please visit IPC web site
>>> http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
>>> information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
>>> ext.2815
>>> ----------------------------------------------------- 
>>
>> ---------------------------------------------------
>> Technet Mail List provided as a service by IPC using LISTSERV 15.0
>> To unsubscribe, send a message to [log in to unmask] with following text in
>> the BODY (NOT the subject field): SIGNOFF Technet
>> To temporarily halt or (re-start) delivery of Technet send e-mail to
>> [log in to unmask]: SET Technet NOMAIL or (MAIL)
>> To receive ONE mailing per day of all the posts: send e-mail to
>> [log in to unmask]: SET Technet Digest
>> Search the archives of previous posts at:
>> http://listserv.ipc.org/archives
>> Please visit IPC web site
>> http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>
>> for additional information, or contact Keach Sasamori at [log in to unmask]
>> or
>
>> 847-615-7100 ext.2815
>> ----------------------------------------------------- 
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
> for additional information, or contact Keach Sasamori at [log in to unmask] or
> 847-615-7100 ext.2815
> -----------------------------------------------------
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
> for additional information, or contact Keach Sasamori at [log in to unmask] or
> 847-615-7100 ext.2815
> ----------------------------------------------------- 

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to 
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to 
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 
for additional information, or contact Keach Sasamori at [log in to unmask] or 
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------------------------
This transmission (including any attachments) may contain confidential 
information, privileged material (including material protected by the 
solicitor-client or other applicable privileges), or constitute non-public 
information. Any use of this information by anyone other than the intended 
recipient is prohibited. If you have received this transmission in error, 
please immediately reply to the sender and delete this information from your 
system. Use, dissemination, distribution, or reproduction of this 
transmission by unintended recipients is not authorized and may be unlawful. 

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2