Since your in Lebanon NH you may want to contact the folks like John T ravis who sells Dage X-ray out of Hudson NH. 

If your company is not a competitor of Benchmark Electronics, Hudson NH then maybe you can get one board x-rayed by one of the inspectors through Engineering, Doug Sommers or Robert Farrell. I no longer work there so I can't help you. 
----- Original Message ----- 
From: "Jerry Dengler " < jdengler @PERGAMON-CORP.COM> 
To: TechNet @ IPC .ORG 
Sent: Tuesday, August 25, 2009 2:34:08 PM GMT -05:00 US/Canada Eastern 
Subject: Re: [TN] x-ray to estimate solder voiding 

Kevin, 

Try ACI in Philadelphia.   www . aciusa .org 


-----Original Message----- 
From: TechNet [ mailto : TechNet @ ipc .org] On Behalf Of Glidden , Kevin 
Sent: Tuesday, August 25, 2009 2:29 PM 
To: TechNet @ IPC .ORG 
Subject: [TN] x-ray to estimate solder voiding 

I am looking to have a couple of PCBs x-rayed to estimate the solder 
voiding on the bottom only center pad of an SMT component.  Can anyone 
recommend a place? 
Off line answers OK. 
Thank you, 

Kevin Glidden 
Manufacturing Engineer 
Luminescent Systems Inc. 
Lebanon, NH 03766 

--------------------------------------------------- 
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To 
unsubscribe , send a message to LISTSERV @ IPC .ORG with following text in 
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or 
(re-start) delivery of Technet send e-mail to Listserv @ ipc .org: SET 
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the 
posts: send e-mail to Listserv @ ipc .org: SET Technet Digest Search the 
archives of previous posts at: http :// listserv . ipc .org/archives Please 
visit IPC web site http :// www . ipc .org/ contentpage .asp? Pageid =4.3.16 for 
additional information, or contact Keach Sasamori at sasako @ ipc .org or 
847-615-7100 ext.2815 
----------------------------------------------------- 

--------------------------------------------------- 
Technet Mail List provided as a service by IPC using LISTSERV 15.0 
To unsubscribe , send a message to LISTSERV @ IPC .ORG with following text in 
the BODY (NOT the subject field): SIGNOFF Technet 
To temporarily halt or (re-start) delivery of Technet send e-mail to Listserv @ ipc .org: SET Technet NOMAIL or (MAIL) 
To receive ONE mailing per day of all the posts: send e-mail to Listserv @ ipc .org: SET Technet Digest 
Search the archives of previous posts at: http :// listserv . ipc .org/archives 
Please visit IPC web site http :// www . ipc .org/ contentpage .asp? Pageid =4.3.16 for additional information, or contact Keach Sasamori at sasako @ ipc .org or 847-615-7100 ext.2815 
----------------------------------------------------- 

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------