What is too warm?
Inge

----- Original Message ----- 
From: "Phil Nutting" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, August 20, 2009 8:59 PM
Subject: Re: [TN] Manual spraying


Inge,

When I was first setting up our hand spray process I found that if the 
boards were still too warm (hot) from the pre-coating bake cycle that I 
would get lots of bubbles in the coating.  When the boards were allowed to 
cool sufficiently before coating these bubbles did not appear.

Phil

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Inge
Sent: Thursday, August 20, 2009 2:18 PM
To: [log in to unmask]
Subject: [TN] Manual spraying

Good Evening,
we use small cans filled with 1B1 conformal coating for handspraying boards.
The guys are not satisfied with the result, because sometimes the result is
matte. Microscope photos show thousands of microscopic bubbles in the
coating. I suspect that it's included driving gas. Or wrong handling the
spray can.Anyone out there with experience? How do you avoid this problem?
/Inge

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to 
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to 
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 
for additional information, or contact Keach Sasamori at [log in to unmask] or 
847-615-7100 ext.2815
-----------------------------------------------------


Note: All the information contained in this e-mail and its attachments is 
proprietary to Kaiser Systems, Inc. and it may not be reproduced without the 
prior written permission of sender.  If you have received this email in 
error, please immediately return it to sender and delete the copy you 
received.

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to 
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to 
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 
for additional information, or contact Keach Sasamori at [log in to unmask] or 
847-615-7100 ext.2815
----------------------------------------------------- 

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------