TECHNET Archives

August 2009

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"David D. Hillman" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, [log in to unmask]
Date:
Thu, 13 Aug 2009 07:51:32 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (298 lines)
Hi Joyce! I can assure you that a flash drive can survive multiple 
exposures in odd orientations to a low oxygen environment quite well 
(well, at least Doug's memory drive can).

Dave



Joyce Koo <[log in to unmask]> 
Sent by: TechNet <[log in to unmask]>
08/13/2009 07:48 AM
Please respond to
TechNet E-Mail Forum <[log in to unmask]>; Please respond to
Joyce Koo <[log in to unmask]>


To
[log in to unmask]
cc

Subject
Re: [TN] NTC - Component bake out






You mean when it flip over many times? 
--------------------------
Sent using BlackBerry


----- Original Message -----
From: TechNet <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Sent: Thu Aug 13 08:32:02 2009
Subject: Re: [TN] NTC - Component bake out

Actually, that flash drive has been through the washer 9 times now with no 

ill effects.  And, as I recall, that same flash drive survived a Kayak 
trip down a North Carolina river in Hillman's pocket.

Doug Pauls



"David D. Hillman" <[log in to unmask]> 
Sent by: TechNet <[log in to unmask]>
08/12/2009 11:42 AM
Please respond to
TechNet E-Mail Forum <[log in to unmask]>; Please respond to
[log in to unmask]


To
[log in to unmask]
cc

Subject
Re: [TN] NTC - Component bake out






Hi  Mike - I have had the opportunity to run Doug Paul's memory stick thru 


the clothes washer/dryer cycle with soap  twice and Doug said it still 
works fine.  The critical parameter is as you described - a good rinse and 


bake/dry. 

Also, Doug no longer loans me his memory stick.

Dave



Mike Fenner <[log in to unmask]> 
Sent by: TechNet <[log in to unmask]>
08/12/2009 11:29 AM
Please respond to
[log in to unmask]


To
[log in to unmask]
cc

Subject
Re: [TN] Component bake out






I did this with mine, as it was a Friday I borrowed some of the "DI" water
for our steam iron to rinse it over and then just left it in the airing
cupboard over the weekend. It worked fine Monday and still does!

Regards
 
 
Mike
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Eric Kalgren
Sent: 12 August 2009 17:10
To: [log in to unmask]
Subject: [TN] Component bake out

I dropped my flash drive in a puddle yesterday, it was completely 
submerged
for about 5 minutes.  I haven't applied any power to it yet, so I'm pretty
sure that it is not completely dead.  It is a Sandisk Cruzer - I mention 
the
brand and type because it is probably easier to look it up and get an idea
of what it looks like than for me to attempt an adequate description.

 

My question:  How long and at what temperature should I bake this guy to
ensure that when I do plug it in, I don't let the magic smoke out of the
components inside the drive?

 

Next time it goes in my pants pocket, not my shirt pocket!

 

Thanks, 

 

Eric Kalgren

Electrical Engineer

The Ferrite Co. Inc.

165 Ledge Street

Nashua, NH 03060

Phone 603-881-5234

Fax 603-881-5406

 



 

PRIVILEGED AND CONFIDENTIAL COMMUNICATION
This E-mail is covered by the Electronic Communications Privacy Act, 18 U.
S. C." 2510-2521 and is legally privileged.  The information contained
herein is confidential and is intended only for the use of the individual 
or
entity named above.  If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, distribution or
copying of this communication is strictly prohibited.  If you have 
received
this transmission in error, please immediately notify the sender by
telephone or via e-mail and delete the original transmission including any
attachments without reading or saving in any manner.

 


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------


***This email, its content, and any files transmitted with it, are 
intended solely for the addressee(s) and may be legally privileged and/or 
confidential. If you are not the intended recipient, please contact the 
sender by return and delete the material from any computer. Any review, 
retransmission, dissemination, or other use of, or taking of any action in 


reliance upon this information by persons or entities other than the 
intended recipient is prohibited.

Messages sent via this medium may be subjected to delays, non-delivery, 
and unauthorized alteration. This email has been prepared using 
information believed by the author to be reliable and accurate, but Indium 


Corporation makes no warranty as to accuracy or completeness. Indium 
Corporation does not accept responsibility for changes made to this email 
after is was sent. Any opinions or recommendations expressed herein are 
solely those of the author. They may be subject to change without 
notice.***

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to 
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to 
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 


for additional information, or contact Keach Sasamori at [log in to unmask] or 


847-615-7100 ext.2815
-----------------------------------------------------


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to 
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to 
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 

for additional information, or contact Keach Sasamori at [log in to unmask] or 

847-615-7100 ext.2815
-----------------------------------------------------


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to 
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to 
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 
for additional information, or contact Keach Sasamori at [log in to unmask] or 
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------------------------
This transmission (including any attachments) may contain confidential 
information, privileged material (including material protected by the 
solicitor-client or other applicable privileges), or constitute non-public 
information. Any use of this information by anyone other than the intended 
recipient is prohibited. If you have received this transmission in error, 
please immediately reply to the sender and delete this information from 
your system. Use, dissemination, distribution, or reproduction of this 
transmission by unintended recipients is not authorized and may be 
unlawful.

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to 
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to 
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 
for additional information, or contact Keach Sasamori at [log in to unmask] or 
847-615-7100 ext.2815
-----------------------------------------------------


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2