Perhaps he has forgotten where he put it?
Regards
Mike
_____
From: [log in to unmask] [mailto:[log in to unmask]]
Sent: 12 August 2009 17:42
To: [log in to unmask]
Cc: [log in to unmask]
Subject: Re: [TN] NTC - Component bake out
Hi Mike - I have had the opportunity to run Doug Paul's memory stick thru
the clothes washer/dryer cycle with soap twice and Doug said it still works
fine. The critical parameter is as you described - a good rinse and
bake/dry.
Also, Doug no longer loans me his memory stick.
Dave
Mike Fenner <[log in to unmask]>
Sent by: TechNet <[log in to unmask]>
08/12/2009 11:29 AM
Please respond to
[log in to unmask]
To
[log in to unmask]
cc
Subject
Re: [TN] Component bake out
I did this with mine, as it was a Friday I borrowed some of the "DI" water
for our steam iron to rinse it over and then just left it in the airing
cupboard over the weekend. It worked fine Monday and still does!
Regards
Mike
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Eric Kalgren
Sent: 12 August 2009 17:10
To: [log in to unmask]
Subject: [TN] Component bake out
I dropped my flash drive in a puddle yesterday, it was completely submerged
for about 5 minutes. I haven't applied any power to it yet, so I'm pretty
sure that it is not completely dead. It is a Sandisk Cruzer - I mention the
brand and type because it is probably easier to look it up and get an idea
of what it looks like than for me to attempt an adequate description.
My question: How long and at what temperature should I bake this guy to
ensure that when I do plug it in, I don't let the magic smoke out of the
components inside the drive?
Next time it goes in my pants pocket, not my shirt pocket!
Thanks,
Eric Kalgren
Electrical Engineer
The Ferrite Co. Inc.
165 Ledge Street
Nashua, NH 03060
Phone 603-881-5234
Fax 603-881-5406
PRIVILEGED AND CONFIDENTIAL COMMUNICATION
This E-mail is covered by the Electronic Communications Privacy Act, 18 U.
S. C." 2510-2521 and is legally privileged. The information contained
herein is confidential and is intended only for the use of the individual or
entity named above. If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, distribution or
copying of this communication is strictly prohibited. If you have received
this transmission in error, please immediately notify the sender by
telephone or via e-mail and delete the original transmission including any
attachments without reading or saving in any manner.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
***This email, its content, and any files transmitted with it, are intended
solely for the addressee(s) and may be legally privileged and/or
confidential. If you are not the intended recipient, please contact the
sender by return and delete the material from any computer. Any review,
retransmission, dissemination, or other use of, or taking of any action in
reliance upon this information by persons or entities other than the
intended recipient is prohibited.
Messages sent via this medium may be subjected to delays, non-delivery, and
unauthorized alteration. This email has been prepared using information
believed by the author to be reliable and accurate, but Indium Corporation
makes no warranty as to accuracy or completeness. Indium Corporation does
not accept responsibility for changes made to this email after is was sent.
Any opinions or recommendations expressed herein are solely those of the
author. They may be subject to change without notice.***
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
***This email, its content, and any files transmitted with it, are intended solely for the addressee(s) and may be legally privileged and/or confidential. If you are not the intended recipient, please contact the sender by return and delete the material from any computer. Any review, retransmission, dissemination, or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited.
Messages sent via this medium may be subjected to delays, non-delivery, and unauthorized alteration. This email has been prepared using information believed by the author to be reliable and accurate, but Indium Corporation makes no warranty as to accuracy or completeness. Indium Corporation does not accept responsibility for changes made to this email after is was sent. Any opinions or recommendations expressed herein are solely those of the author. They may be subject to change without notice.***
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
