Good morning all,
Being blessed with an abundance of bright young co-op students, we are
doing a study of the topic here at Rockwell Collins. The study will
finish in a few weeks and I plan on publishing the results, probably at
Apex.
Doug Pauls
Rockwell Collins
Brian Ellis <[log in to unmask]>
Sent by: TechNet <[log in to unmask]>
08/21/2009 01:17 AM
Please respond to
TechNet E-Mail Forum <[log in to unmask]>; Please respond to
Brian Ellis <[log in to unmask]>
To
[log in to unmask]
cc
Subject
Re: [TN] Contamination by Hand Sanitizers & Lotions
Apart from the thread on this subject here a month or two back, the only
mention in literature that I know of is in my book, which discusses in a
diagrammatic form not only the effect of lotions before and after
soldering. Sanitisers didn't exist in those days, but their effect is
similar to lotions, although their oily components are lower.
As an addendum to my post in the earlier thread, I was back in hospital
for another operation last week and found that they had placed
squirt-bottles of sanitisers every 5 m along all the corridors,
presumably as an anti-H1N1 measure. This allowed me to have better
access to the stuff and I found that the hand was persistently
contaminated. I was able to repeat my mirror test 2 or 3 hours after
deliberately using the sanitiser correctly, being careful not to handle
anything in the meanwhile. As one of the components is a high molecular
weight polymerised glycol, it is a reasonable assumption that this is
the persistent substance. As it is hygroscopic, it is also a reasonable
assumption that it's not going to improve sensitive electronics if
transferred from the hand to an assembly. If such transfer occurs before
soldering, then the heat may cause further polymerisation, rendering the
hygroscopic residues more difficult, maybe impossible, to remove.
Brian
Diljit Matharu wrote:
> Can someone direct me to resources which talk about PCBAs contamination
by the use of hand sanitizers & lotions.
>
>
>
> Thanks,
>
>
>
> Diljit S. Matharu
> Quality Leader - B C
> Creation Technologies
>
> Office: 604.430.4336 x 3395 | Mobile: 778.240.8144
> 8977 Fraserton Court | Burnaby, BC, Canada | V5J 5G1
> [log in to unmask]<mailto:[log in to unmask]>
| www.creationtech.com<http://www.creationtech.com/>
>
> [cid:[log in to unmask]]Working together to build the future
>
>
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text
in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
http://listserv.ipc.org/archives
> Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
> -----------------------------------------------------
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|