Steve,
 Thank you very much for posting.   I hope it will generate some
discussion and/or direction to some good reading material/articles.   I
was not aware that there were several method of conducting spot weld on
material.   I will try to identify the material leave/foil that I am
working with.

Vic,

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of stephengregory5849
Sent: Wednesday, August 26, 2009 8:07 AM
To: [log in to unmask]
Subject: Re: [TN] Spot weld photos

Morning Victor,
Got your pictures. Here they are:

http://stevezeva.homestead.com/files/Batt-1.JPG


http://stevezeva.homestead.com/files/Batt-Orange-1.jpg


While I'm no expert on spot welds, I'm pretty sure you won't see any
sort of 
"reflowed" appearance with a spot weld. You'll just see a mark or 
indentation of where the electrodes contact the metal. Have these
battery 
terminals been falling off the batteries?

Steve

----- Original Message ----- 
From: "Victor Hernandez" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, August 26, 2009 8:19 AM
Subject: [TN] Spot weld photos


Steve,

Can you please post these photos on your home page.   Many thanks,


Vic,

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to 
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to 
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 
for additional information, or contact Keach Sasamori at [log in to unmask]
or 
847-615-7100 ext.2815
----------------------------------------------------- 

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------