TECHNET Archives

August 2009

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
Date:
Fri, 14 Aug 2009 03:04:15 +0000
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, colin mcvean <[log in to unmask]>
Subject:
MIME-Version:
1.0
Content-Transfer-Encoding:
quoted-printable
Content-Type:
text/plain; charset="iso-8859-1"
From:
colin mcvean <[log in to unmask]>
Parts/Attachments:
text/plain (21 lines)
Folks,
 
From my previous question regarding pattern crack we are seeing on a wire-bonded flex-rigid PCB, I have now found more evidence that the presented FPCB is ok, but after reflow for SMT assembly, this is where the cracking is first found (rather than after wire-bond process). The reflow profile being used peaks at 245oC, but rapidly cools from peak to 135oC in about 30s. This seems to me to be too rapid a cool rate, and with the pad metallics being 0.2uM gold over 10uM Nickel over 30uM copper pad. Are CTE rates on cooling the same as CTE rates for heating? I think I may have CTE mismatch on the coatings, which when cooled too rapidly, are causing the crack. Any metallurgists out there willing to comment?
 
Thanks
 
Colin


      

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2