I once saw a product that had a separate plastic cover that was vacuum
molder to fit closely over the PCB.  It was not molded to the PCB but
was molded to a model that had been made of the PCB.  In that
application they actually glued the cover at the corners to the PCB
after it had been screwed down to the enclosure.

They said it was for the same reason you give, to keep a stream of water
from directly contacting the PCB. 

I do not know where they had it done but I think getting a good model
would be the hardest part.

Good Luck,

Jerry Dengler

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Douglas Pauls
Sent: Friday, July 17, 2009 10:53 AM
To: [log in to unmask]
Subject: [TN] Shrink Wrap a Board

Good morning all,

Now that we have thoroughly established most of us are ugly and don't
want our pictures bandied about, I have a question.  And Friday seems to
be a time for silly questions, so here goes.

Have any of you ever seen a product that essentially vacuum forms a
plastic film over the surface of an assembly?  Not a chemical vapor
deposition like Parylene or conformal coat process.  For a particular
(really odd) application, I want to put a rain guard on the surface of
an assembly.  Something where I could take a squirt gun and shoot water
at the assembly and never have it hit the surface (of the assembly). 

Don't ask why.

Doug Pauls

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------