Subject: | |
From: | |
Reply To: | |
Date: | Thu, 30 Jul 2009 15:41:52 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
And don't forget that 2 mils in vias translates to at least 2 mils on the
outer layers... Is it possible to double-up on vias if impedance is an
issue?
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Tony Steinke
Sent: Thursday, July 30, 2009 10:18 AM
To: [log in to unmask]
Subject: Re: [TN] Via plating question
It is difficult but it can be done. $$$$
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Upton, Shawn
Sent: Thursday, July 30, 2009 10:06 AM
To: [log in to unmask]
Subject: [TN] Via plating question
Quick question: I usually have via's plated to a minimum of 1mil. I
have a high current design where I'd like to have those via's plated to
2mil (near 2oz, to match the 2oz spec for the layers) -- but the board
has some 15mil vias and is a 125mil thick board. Would a typical board
house be ok with this? I don't care about getting those 15mil mil
diameter via's to 2mil barrel plating, only the 32mil ones need to be
that thick.
Shawn Upton, KB1CKT
Test Engineer
Allegro MicroSystems, Inc
[log in to unmask]
603.626.2429/fax: 603.641.5336
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
Internal Virus Database is out-of-date.
Checked by AVG.
Version: 7.5.560 / Virus Database: 270.12.36/2126 - Release Date: 5/21/2009
6:22 AM
Internal Virus Database is out-of-date.
Checked by AVG.
Version: 7.5.560 / Virus Database: 270.12.36/2126 - Release Date: 5/21/2009
6:22 AM
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|