TECHNET Archives

June 2009

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Victor Hernandez <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, [log in to unmask]
Date:
Thu, 4 Jun 2009 08:37:04 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (1 lines)
Can someone elaborate on the statement below " but Airbuses do not have hydraulic systems ".  No hydraulic components at all!



vic,







-----Original Message-----

From: TechNet [mailto:[log in to unmask]] On Behalf Of Werner Engelmaier /*

Sent: Thursday, June 04, 2009 7:47 AM

To: [log in to unmask]

Subject: Re: [TN] Flight 447





 I doubt very much that any aircraft has Pb-free solder joints at this point—and any speculation about Flight 447 at this point is not warranted.

There are however, other considerations.

Boeing aircraft are not totally by (electrical) wire, but have back-up hydraulic systems and pop-out emergency turbines that generate electricity from the airplane velocity to operate the hydraulics [I do not know if that applies to all Boeing aircraft, and whether or not Airbuses have something similar—but Airbuses do not have hydraulic systems].

So, I do in fact choose my airline, to some degree at least, on the planes they fly.

Werner





 





 



-----Original Message-----

From: Joyce Koo <[log in to unmask]>

To: [log in to unmask]

Sent: Thu, 4 Jun 2009 8:24 am

Subject: Re: [TN] Flight 447





















Agree with IngeMar!  With my recent trip involved 2 problem aircrafts; one 

electrical wire fail, and the other with engin problem(same model of aircraft), 

I would like to know a bit more.  With technet resourceful background in high 

rel asy, discussion could be beneficial to prevent future failure.  Not say I 

can hand pick my aircraft upon travel, but picking an airline might be in the 

consideration for me in my future travel. 

--------------------------

Sent using BlackBerry





----- Original Message -----

From: TechNet <[log in to unmask]>

To: [log in to unmask] <[log in to unmask]>

Sent: Thu Jun 04 06:06:05 2009

Subject: Re: [TN] Flight 447



For the first time, I don't agree fully with you, Brian. 

I think

 calling the discussion SCUTTLEBUTT and GOSSIP is little hard. Those who 

really do that are journalists (not all)who make little extra money, while the 

TN guys who were discussing are quite the opposite. I can't see bad guys behind 

the messages that have passed, but professionel and serious  engineers, who try 

to learn and understand from this sad event. If the correspondens stays within 

etics and good manner, I can't see why these guys had to be knocked out like 

that.

Sorry for having another opinion..

/Inge



-----Original Message-----

From: TechNet [mailto:[log in to unmask]] On Behalf Of Brian Ellis

Sent: torsdag 4 juni 2009 09:15

To: [log in to unmask]

Subject: Re: [TN] Flight 447



I think it ill-becomes any of us to speculate on the cause of this tragic 

accident or to follow the equally speculative sequence of events. 

and especially the implication of it being a European plane. A few years ago, 

before I retired, I was in contact with experts in both Boeing and Airbus about 

lead-free reliability. I was informed that they had a common study group and 

that much of the avionics used was common to both makers. My interlocutors were 

the Boeing Director of Environmental Affairs and Senior Scientist of 

International SHEA



Until (if ever) we have facts about this accident, IMHO, we would be wiser to 

stop the speculation which really amounts to nothing but SCUTTLEBUTT and GOSSIP.



Brian



Ken Bloomquist wrote:

> Hi Genny,

> 

> I just read this from the weather site that was ment

ioned earlier:

> 

> Hello Tim,   Check out "tin whiskers" in Google  Some enlightening

> information there  My cousin works for BAE Systems, and has some theories on

> this&   His words, "The first aircraft to be 100% completely ROHS compliant.

> (NO LEAD in the solder.) I said it 5 years back.. They could not give me a

> book of unlimited flight coupons on this craft...   I'd swap it for a D90.

> :)   http://news.yahoo.com/s/ap/brazil_plane

> Be well!

> Jim H---

> 

> The web site where I got this was 

> http://www.weathergraphics.com/tim/af447/

> 

> KennyB

> 

> -----Original Message-----

> From: Genny Gibbard [mailto:[log in to unmask]]

> Sent: Wednesday, June 03, 2009 9:44 AM

> To: [log in to unmask]

> Subject: Re: [TN] Test

> 

> So was the Airbus 330 leadfree or not?  I was trying to google it and 

> wasn't finding any info on that, other than the one comment on that 

> link.

> 

> 

> Genny

> 

> -----Original Message-----

> From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Gregory

> Sent: June 3, 2009 10:02 AM

> To: [log in to unmask]

> Subject: Re: [TN] Test

> 

> Everyone passed (GRIN). Why I did the test was because I was trying to 

> post a message about the AF447 crash and my message kept getting 

> kicked back with this:

> 

> Your message did not reach some or all of the intended recipients.

> 

>       Subject:    [TN] Off-topic Discussion; AF447 Crash

>       Sent:   6/3/2009 10:12 AM

> 

> The following recipien

t(s) could not be reached:

> 

>       [log in to unmask] on 6/3/2009 10:12 AM

>             There was a SMTP communication problem with the 

> recipient's email server.  Please contact your system administrator.

>             <OWA.OAIELECTRONICS.COM #5.5.0 smtp;550 Denied by policy.>

> 

> 

> Let's see if I can post it in this reply...

> 

> While it may never be known what caused the tragic crash of AF447, it 

> raises some real questions about what happened.

>  

> Having flown for over 12-years while in the Navy, any big accident 

> attracts my attention because of my interest in aviation. I've been 

> following this event quite closely to try and learn what might have 

> happened, and learned that there have been several incidents involving 

> failures of the ADIRU (Air Data Inertial Reference Unit) on A320's, 

> other A330's, and 777's that caused the aircraft to depart controlled 

> flight. Below is from a link about the AF447 crash that I was reading:

>  

> "Air France reported, that they had received an automatic message from 

> the airplane reporting an electrical short circuit and the failure of 

> multiple systems at 02:14Z. Air Traffic Control as well as Military 

> Stations along the Atlantic coast of South America, Africa, Portugal, 

> Spain and France have been alerted and attempted to contact the 

> airplane without success. Attempts to locate the airplane using civil 

> and military radars from both west and east coasts20(including France) 

> of the Atlantic also proved unsuccessful. The airplane entered service 

> in 2005 and had accumulated 18870 flights hours. The captain had 11700 

> flight hours, one of the first officers had 3000, the other 6600 flight hours.

> 

> Sources within Air France reported, that the automatic message did not 

> only report an electrical short circuit, but also the loss of cabin 

> pressure. This information has been confirmed by FAB, who also stated, 

> that the position of the airplane was given as N3.5777 W30.3744 in 

> that message.

> 

> New information provided by sources within Air France suggests, that 

> the ACARS messages of system failures started to arrive at 02:10Z 

> indicating, that the autopilot had disengaged and the fly by wire 

> system had changed to alternate law. Between 02:11Z and 02:13Z a 

> flurry of messages regarding ADIRU and ISIS faults arrived, at 02:13Z 

> PRIM 1 and SEC 1 faults were indicated, at 02:14Z the last message 

> received was an advisory regarding cabin vertical speed. That sequence 

> of messages could not be independently verified."

> 

> Then I was reading the comments this gentleman received after his 

> meteorogical analysis of the weather conditions at the time of the

> crash:

> 

> http://www.weathergraphics.com/tim/af447/

>  

> and up popped the topic of lead-free. You'll see that in the comments.

>  

> 

> Then I found this from an article that Mike Buetow wrote back in 2004:

> 

> 

> "The sky was=2

0the limit for lead-free, literally. Declarations from 

> Europe and elsewhere led us to believe that electronics for military 

> and aerospace applications would be exempt from bans on lead. 

> Suppliers to companies in those sectors were flying high, believing 

> that under the EU directives (WEEE and RoHS) they were off the radar.

> 

> None of that is stopping Airbus from taking a closer look, querying 

> its suppliers on their use of lead and other materials on the EU hit list.

> In a Jan. 9 letter, a copy of which was obtained by PCD&M, Airbus 

> France director of procurement quality and supply chain equipment 

> Jean-Philippe Bedos explained: "For Airbus, both directives and the 

> associated planning are applicable."

> 

> By contract, the European airplane consortium prohibits its equipment 

> suppliers from using materials "forbidden by national and 

> international regulations, or likely to be...." The statement clearly 

> implies WEEE and RoHS. With that in mind, Airbus submitted to its 

> suppliers a 46-question form asking about lead use. Responses, wrote 

> Bedos, will be analyzed by Airbus and "will initiate an exchange and a 

> follow up of your process and the possible corrective actions to mitigate the 

risks."

> 

> That's not all. The consortium is also putting the onus for 

> end-of-life disposal squarely on its suppliers. In an October 

> presentation by Airbus UK's environmental affairs coordinator, a slide 

> listing environmental requirements for Airbus' supplier

s included this 

> statement: "In particular for electrical and electronic equipment, 

> supplier responsibility for the elimination of the corresponding waste 

> at the end of life of the delivered product including packaging, 

> unless otherwise agreed with Airbus." (Ever tried to throw out a 

> plane? It's not as easy as it looks.)

> 

> For products delivered after July 1, 2006, Airbus is mandating its 

> suppliers attest in writing that their products contain no lead, 

> cadmium or other substances (including polybrominated biphenyls, or 

> PBBs; and polybrominated dephenyl ethers, or PBDEs) banned per the RoHS 

Directive.

> And if Airbus succumbs, it says here it's only a matter of time until 

> Boeing, Lockheed Martin, Northrop Grumman and the other primes follow.

> 

> ...For now, confusion reigns. Will it end before airplane parts rain, 

> too?"

> 

> 

> So, it begs the question; COULD this have something to do with 

> lead-free avionics?

>  

> Steve

>  

> P.S. During my searches, I ran across this. If you're into aviation, 

> you'll like it.

>  

> http://www.gillesvidal.com/blogpano/cockpit1.htm

> 

> ---------------------------------------------------

> Technet Mail List provided as a service by IPC using LISTSERV 15.0 To 

> unsubscribe, send a message to [log in to unmask] with following text in 

> the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt 

> or

> (re-start) delivery of Technet send e-mail to [log in to unmask]: SET 

> Technet NOMAIL or (MAIL) To rece

ive ONE mailing per day of all the

> posts: send e-mail to [log in to unmask]: SET Technet Digest Search the 

> archives of previous posts at: http://listserv.ipc.org/archives Please 

> visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 

> for additional information, or contact Keach Sasamori at 

> [log in to unmask] or 847-615-7100 ext.2815

> -----------------------------------------------------

> 

> ---------------------------------------------------

> Technet Mail List provided as a service by IPC using LISTSERV 15.0 To 

> unsubscribe, send a message to [log in to unmask] with following text in 

> the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt 

> or (re-start) delivery of Technet send e-mail to

> [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing 

> per day of all the posts: send e-mail to

> [log in to unmask]: SET Technet Digest

> Search the archives of previous posts at: 

> http://listserv.ipc.org/archives Please visit IPC web site 

> http://www.ipc.org/contentpage.asp?Pageid=4.3.16

> for additional information, or contact Keach Sasamori at 

> [log in to unmask] or 847-615-7100 ext.2815

> -----------------------------------------------------

> 

> ---------------------------------------------------

> Technet Mail List provided as a service by IPC using LISTSERV 15.0 To 

> unsubscribe, send a message to [log in to unmask] with following text in 

> the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt 

> or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET 

> Technet NOMAIL or (MAI

L) To receive ONE mailing per day of all the 

> posts: send e-mail to [log in to unmask]: SET Technet Digest Search the 

> archives of previous posts at: http://listserv.ipc.org/archives Please 

> visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 

> for additional information, or contact Keach Sasamori at 

> [log in to unmask] or 847-615-7100 ext.2815

> -----------------------------------------------------

> 



---------------------------------------------------

Technet Mail List provided as a service by IPC using LISTSERV 15.0 To 

unsubscribe, send a message to [log in to unmask] with following text in the BODY 

(NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) 

delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or 

(MAIL) To receive ONE mailing per day of all the posts: send e-mail to 

[log in to unmask]: SET Technet Digest Search the archives of previous posts at: 

http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 

for additional information, or contact Keach Sasamori at [log in to unmask] or 

847-615-7100 ext.2815

-----------------------------------------------------



---------------------------------------------------

Technet Mail List provided as a service by IPC using LISTSERV 15.0

To unsubscribe, send a message to [log in to unmask] with following text in

the BODY (NOT the subject field): SIGNOFF Technet

To temporarily halt or (re-start) delivery of Technet send e-mail to 

[log in to unmask]: SET Technet NOMAIL or (MAIL)

To receive ONE mailing per day of all the posts

: send e-mail to 

[log in to unmask]: SET Technet Digest

Search the archives of previous posts at: http://listserv.ipc.org/archives

Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for 

additional information, or contact Keach Sasamori at [log in to unmask] or 

847-615-7100 ext.2815

-----------------------------------------------------



---------------------------------------------------------------------

This transmission (including any attachments) may contain confidential 

information, privileged material (including material protected by the 

solicitor-client or other applicable privileges), or constitute non-public 

information. Any use of this information by anyone other than the intended 

recipient is prohibited. If you have received this transmission in error, please 

immediately reply to the sender and delete this information from your system. 

Use, dissemination, distribution, or reproduction of this transmission by 

unintended recipients is not authorized and may be unlawful.



---------------------------------------------------

Technet Mail List provided as a service by IPC using LISTSERV 15.0

To unsubscribe, send a message to [log in to unmask] with following text in

the BODY (NOT the subject field): SIGNOFF Technet

To temporarily halt or (re-start) delivery of Technet send e-mail to 

[log in to unmask]: SET Technet NOMAIL or (MAIL)

To receive ONE mailing per day of all the posts: send e-mail to 

[log in to unmask]: SET Technet Digest

Search the archives of previous posts at: http://listserv.ipc.org/archives

Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.

3.16 for 

additional information, or contact Keach Sasamori at [log in to unmask] or 

847-615-7100 ext.2815

-----------------------------------------------------







 





---------------------------------------------------

Technet Mail List provided as a service by IPC using LISTSERV 15.0

To unsubscribe, send a message to [log in to unmask] with following text in

the BODY (NOT the subject field): SIGNOFF Technet

To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)

To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest

Search the archives of previous posts at: http://listserv.ipc.org/archives

Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815

-----------------------------------------------------


ATOM RSS1 RSS2