You can send the wire to the manufacturer for requalification, for a fee.
RMA solder wire will last for many years, but the manufacture must supply a
shelf life, usually 3 - 5 years.
Karen Tellefsen - Electrical Testing
[log in to unmask]
908-791-3069
Steve Gregory
<SGregory@OAIELEC
TRONICS.COM>
Sent by: TechNet
<[log in to unmask]>
Well, we made it to Friday!
I'm going ask ya'll a couple of question that I think I know the answer
to, but I want to hear what you think.
Right now I'm in the midst of gathering up all my solder dross, expired
solder paste, and wire solder for a shipment to my recyclers. I noticed
we had a bunch of wire solder in the locker of our training room that
was really old, like it was manufactured back in February of 1997. The
alloy is 63/37, the flux core is a pretty active water soluble organic
acid.
The manufacturer says that shelf life for flux cored wire solder is
3-years. But when I took some of the solder and soldered with it, it
soldered absolutely fine. Wet and flowed out with no problems
whatsoever.
So my question is, have any of actually had any problems soldering with
flux cored wire solder because it was too old? Do you think that
manufacturers shelf life is realistic?
Steve
Enthone GmbH Geschäftsführer: Knut Balzer, Luc de Croo, Jürgen Dietrich Amtsgericht Düsseldorf HRB 45276
USt-Id-Nr. DE 811 205 946
This communication is for use by the intended recipient and contains information that may be privileged, confidential or copyrighted under applicable law. If you are not the intended recipient, you are hereby formally notified that any use, copying or distribution of this e-mail, in whole or in part, is strictly prohibited. Please notify the sender by return e-mail and delete this e-mail from your system. Unless explicitly and conspicuously designated as "E-Contract Intended", this e-mail does not constitute a contract offer, a contract amendment, or an acceptance of a contract offer. This e-mail does not constitute a consent to the use of sender's contact information for direct marketing purposes or for transfers of data to third parties.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|