Joe,

My recommendation is the Alphatron - MPT-200A. We've had this thing for at 
least 15yrs now. No service calls. Use it every day two shifts, Very nice 
compact piece of gear.




Joe Macko <[log in to unmask]> 
Sent by: TechNet <[log in to unmask]>
06/30/2009 12:21 PM
Please respond to
TechNet E-Mail Forum <[log in to unmask]>; Please respond to
[log in to unmask]


To
[log in to unmask]
cc

Subject
[TN] crimp contact pull force tester recommendation






All,

 

I have been asked to recommend a crimp contact / wire pull force tester
to check crimped contacts per IPC-A-620, section 19.7.  The stranded
wire gauge range is 20 to 30 awg. I worked with a pull tester at a
previous employer a few years ago.

 

Please share your equipment recommendations if you had to purchase a
pull tester today that would comply with IPC-A-620, class 2 and class 3
requirements.  thx

 

Best Regards,

-Joe M.

 


"This e-mail and any attachments are solely for the use of the addressee 
and may contain L-3 proprietary information that may also be defined as 
U.S. Government export controlled technical data. If you are an unintended 
recipient of this e-mail, use, disclosure or distribution of its content 
is prohibited. Please notify the sender by return e-mail and immediately 
delete this message."
 

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to 
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to 
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 
for additional information, or contact Keach Sasamori at [log in to unmask] or 
847-615-7100 ext.2815
-----------------------------------------------------



---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------