TECHNET Archives

May 2009

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Inge <[log in to unmask]>
Date:
Fri, 22 May 2009 23:09:53 +0200
Content-Type:
text/plain
Parts/Attachments:
text/plain (77 lines)
We have small XY slide boards, that are moved manually. With ball bearings, 
about 20x20 inches, height some 2 inches. The board's top plate  is anodized 
aluminum. I'll see if I can figure out from where we get them. You can move 
the board with fingertips under microscope.

Inge


----- Original Message ----- 
From: "Dominic Boudreau" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, May 22, 2009 7:16 PM
Subject: [TN] PCB holder for microscope inspection


Hello Technetters, I would like to have your help on something.  Some of the 
PCBs that we assemble are thick and heavy : 14 '' X 14 '' 0.125'' thick. The 
problem we have is that our inspectors have difficulties manipulating them 
for the inspection and with time, they got minor shoulder ache.



I would like to know if there is any equipment  we could buy that would 
support the PCB for the inspection under the microscope. The support  should 
be able to rotate the PCB on all axes.



Dominic Boudreau

Ingénieur de produit / Manufacturing Engineer





30 ans déjà! - Already 30 years!

950 rue Bergar, Laval, Québec, H7L 5A1

t : 450-967-7100 ext : 337

Mtl : 514-990-5762

f : 450-967-7444

[log in to unmask]

www.digico.cc <http://www.digico.cc/>




---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to 
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to 
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 
for additional information, or contact Keach Sasamori at [log in to unmask] or 
847-615-7100 ext.2815
----------------------------------------------------- 

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2