Subject: | |
From: | |
Reply To: | |
Date: | Fri, 22 May 2009 23:09:53 +0200 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
We have small XY slide boards, that are moved manually. With ball bearings,
about 20x20 inches, height some 2 inches. The board's top plate is anodized
aluminum. I'll see if I can figure out from where we get them. You can move
the board with fingertips under microscope.
Inge
----- Original Message -----
From: "Dominic Boudreau" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, May 22, 2009 7:16 PM
Subject: [TN] PCB holder for microscope inspection
Hello Technetters, I would like to have your help on something. Some of the
PCBs that we assemble are thick and heavy : 14 '' X 14 '' 0.125'' thick. The
problem we have is that our inspectors have difficulties manipulating them
for the inspection and with time, they got minor shoulder ache.
I would like to know if there is any equipment we could buy that would
support the PCB for the inspection under the microscope. The support should
be able to rotate the PCB on all axes.
Dominic Boudreau
Ingénieur de produit / Manufacturing Engineer
30 ans déjà! - Already 30 years!
950 rue Bergar, Laval, Québec, H7L 5A1
t : 450-967-7100 ext : 337
Mtl : 514-990-5762
f : 450-967-7444
[log in to unmask]
www.digico.cc <http://www.digico.cc/>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|