Subject: | |
From: | |
Reply To: | |
Date: | Thu, 14 May 2009 22:31:07 +0200 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Anat,
send a photo to Steve Gregory so that we can see the solder meniscus and
solder amount.
TN guru John Maxwell will solve the mystery before you say
ubuntidiskloadingexpertisesalary
Inge
----- Original Message -----
From: "Anat Douek" <[log in to unmask]>
To: "'TechNet E-Mail Forum'" <[log in to unmask]>; "'Inge'"
<[log in to unmask]>
Sent: Thursday, May 14, 2009 11:18 PM
Subject: 0201 capacitor failure after reflow
>
>
> Hi,
> We have 8 layers RF circuit, the internal layers are FR4 and the top &
> bottom layers are ROGGERS material. The PCB pads are solder mask define.
> There are many 0201 components on this circuit without any problem, and
> one
> type of capacitors is rejected after the reflow process. The problem is
> that
> the capacitors pads are separated from the body completely or there are
> cracks between the pads and the capacitor body. The pads of the capacitor
> located on the bottom and on the sides of it, there is no pads on the top
> of
> the component.
> What can be the cause of this failure?
> Is different size of pads of the capacitor on the PCB can cause this
> problem
> ?
>
> Anat
>
>
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|