Subject: | |
From: | |
Reply To: | |
Date: | Sun, 19 Apr 2009 16:06:44 +0000 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
You have two choices.
If your company has a certified gold plate repair person, materials and capacity to do all the assemblies in time then strip and repalte can be done in-house.
The best choise may be to send the assemblies to Circuit Technology Center in Haverhill (Bradford) MA. They we formerly called Circuit Repair Center but changed the name. They could easily wick off the solder, strip the edge down to bare copper, apply the nickle then the gold.
Actually their may be a third choice. If the board supplier didn't meet the PCB build specifications then they are on the hook for these boards. The problem may be the value added parts and labor. They may say it not their fault your incoming inspector didn't catch it before it was built. It would depend on how much they want to continue to be your supplier.
----- Original Message -----
From: "Gary Camac" <[log in to unmask]>
To: [log in to unmask]
Sent: Friday, April 3, 2009 12:38:46 PM GMT -05:00 US/Canada Eastern
Subject: [TN] Edge connector repair
Good morning all,
Here's the scenario - I have assemblies that should have Ni/Au plating
on edge connector but don't; the assemblies are built; can repairs be
made?
Thanks in advance,
Gary Camac
Senior Manufacturing Engineer
DICKEY-john Corp.
5200 Dickey John Road
Auburn, IL 62616-0010
Telephone 217-438-2288
[log in to unmask]
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|