TECHNET Archives

March 2009

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Thayer, Wayne" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Thayer, Wayne
Date:
Sat, 7 Mar 2009 08:13:48 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (90 lines)
Expect to pay about $300/microscope for special eyeglass compatible eyepieces, which move the focal point back about a 7mm.  If you buy enough, maybe they will give you a discount.  Alternatively, declare all of your microscopes as alternative safety glasses!  After all, if you leave the rubber eyepiece guards in place, they have side protection.

________________________________________
From: TechNet [[log in to unmask]] On Behalf Of Inge [[log in to unmask]]
Sent: Saturday, March 07, 2009 5:27 AM
To: [log in to unmask]
Subject: Re: [TN] safety glasses

I don't understand the problem, Roger,
isn't your microscope camera connected to a high resolution monitor?
/Inge


----- Original Message -----
From: "Roger Mack" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, March 06, 2009 4:05 PM
Subject: [TN] safety glasses


> We are implementing a mandatory safety glasses policy across all of
> manufacturing. This will replace the requirement for use in just
> designated areas.
>
> How do you handle the use of microscopes with a safety glasses policy? Are
> inspectors allowed to remove glasses while using microscopes? The current
> issued glasses leave your eye too far from the eyepieces for a full view.
>
> We do have a few of the Vision Engineering Lynx scopes, but most are Leica
> or B&L stereo microscopes.
>
>
> Roger Mack  P.Eng.
> Manufacturing Specialist
> Parker Hannifin Corporation
> Electronic Controls Division
> 1305 Clarence Avenue
> Winnipeg, MB  R3T 1T4 Canada
> direct 204 453 3339 x373
> www.vansco.ca
> www.parker.com
>
>
>
>
>
> PLEASE NOTE: The preceding information may be confidential or
> privileged. It only should be used or disseminated for the purpose
> of conducting business with Parker. If you are not an intended
> recipient, please notify the sender by replying to this message and
> then delete the information from your system. Thank you for your
> cooperation.
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
> for additional information, or contact Keach Sasamori at [log in to unmask] or
> 847-615-7100 ext.2815
> -----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

This e-mail and any files transmitted with it may be proprietary and are intended solely for the use of the individual or entity to whom they are addressed. If you have received this e-mail in error please notify the sender.
Please note that any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of ITT Corporation. The recipient should check this e-mail and any attachments for the presence of viruses. ITT accepts no liability for any damage caused by any virus transmitted by this e-mail.

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2