TECHNET Archives

March 2009

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Werner Engelmaier /* <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, [log in to unmask]
Date:
Tue, 31 Mar 2009 09:46:00 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (255 lines)
 Inge,
Alas, Ich bin ein Unikum.

Werner


 


 

-----Original Message-----
From: Hernefjord Ingemar <[log in to unmask]>
To: TechNet E-Mail Forum <[log in to unmask]>; [log in to unmask] <[log in to unmask]>
Sent: Tue, 31 Mar 2009 3:38 am
Subject: RE: {Spam?} Re: [TN] solder fatigue predictions for highly asymmetrical duty cycles










 ...the tricky part is getting all the necessary info, AND getting correct info.

You see what I mean? Try to solve this equation: x+y=    
nothing after the equals-sign, not easy to do any calculation.

has nothing to do with age, rather lack of knowhow. That's why we need many 
werners..

Inge



-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Werner Engelmaier /*
Sent: tisdag 31 mars 2009 02:01
To: [log in to unmask]
Subject: {Spam?} Re: [TN] solder fatigue predictions for highly asymmetrical 
duty cycles

 Hi Inge,
You are going super-conservative in your old age. Heck, I have had accelerated 
tests with mean cyclic lives of 100 cycles and others with no failures in 
100,000 cycle---It all depends.
If you understand the load drivers and the connections to cyclic life, you can 
execute a proper Design-for-Reliability in almost all cases; the tricky part is 
getting all the necessary info, AND getting correct info.

Werner


 


 

-----Original Message-----
From: Inge <[log in to unmask]>
To: [log in to unmask]
Sent: Mon, 30 Mar 2009 6:28 pm
Subject: Re: [TN] solder fatigue predictions for highly asymmetrical duty cycles









not an answer, but some reflections....?
?

I'm not a guru, more of a practical gnu. We have some math specialists who have 
produced models and calculations that make a normal reader exhausted to go from 
page 1 to page 200. After going through some reports like that, you feel rather 
disoriented. So, in order to know about the failure modes and six sigma, Time to 
Failure and such parameters, we decided to go the hands-on way. We 'simply' 
produced a lot of cloned boards with a substantial lot of components on, and 
started temp cycling with various symmetries and limits. Believe it or not, we 
have passed 10,000 cycles in some cases. The result will not be known until the 
end of this year. This method is not very comfortable either, making all these 
hundreds of microscope inspections and measure daisy chains and other stuff. 
Because our customer wants this way, we simply do it. Personally, I prefer 
neither of the ways, but more of a cautious and well performed design.  Follow 
the derating rules, don't buy components from unknown manufacturers,  hold back 
when the design engineers excess in very large or very odd boards,  keep to a 
board producer you know, don't mix extremly hot components with mW components 
and a lot more of goodies .  Sounds like stopping the development of new 
technology, but after reading Toyota's LEAN thinking, it seems as making many 
small development steps are safer, than to make a brand new super design. In 
earlier days, we had time to make prototypes, take our time and make a small 
pre-series, then introduce improvements, longlife test and slowly start series 
production. 
Now we go directly from CAD engineering to production....?

says an old dog?
?

Inge?
?


----- Original Message -----
From: "Nieznanski, John A - SSD" <[log in to unmask]>?

To: <[log in to unmask]>?

Sent: Monday, March 30, 2009 10:05 PM?

Subject: [TN] solder fatigue predictions for highly asymmetrical duty cycles?
?


Hello Tech-Net Gurus,?
?

The solder fatigue parameters called out in IPC-D-279, IPC-SM-785 and
IPC-9701 all assume symmetrical (i.e. 50%) duty cycles and temperature swings. 
This raises the question as to how far these calculations can be pushed to 
predict solder fatigue in low duty cycle, variable duty cycle or high duty cycle 
applications.?
?

In particular, Tsj ( = mean cyclic solder joint temperature), and tD ( = 
half-cycle dwell time in minutes) are both used and are directly affected by 
duty cycle. It is simple enough to recalculate these values based on 
asymmetrical duty cycles, but how do we know that the predicted solder fatigue 
results are still valid? If we know, do we know what assumptions are required to 
make the results valid? This seems like a fairly common situation. Has anyone 
correlated measured results to predictions in this regard??
?

Specifically, there are numerous caveats in the specs including for example, 
high-frequency (e.g, vibration) conditions where tD < 1 second, but none of 
these caveats apply here.?
?

For example, with a power on dwell time of 6 minutes (system reaches thermal 
equilibrium in < 1 minute) and a power off dwell time of 54 minutes (10% duty 
cycle), I assume I can simply use tD = 6 minute dwells and Tsj = average solder 
joint temperature over 60 minute cycle. Do you agree with this approach??
?

Another potential case of interest is if the duty cycle is reduced to something 
less than 1 minute (but more than 1 second; not a vibration situation), such 
that the stabilized operating temperature is not reached. 
Can any valid fatigue calculations be performed in these cases if I can 
determine a valid Tsj for a 1 minute tD??
?

Thanks in advance for your insights and assistance.?
?

Best regards,?
?

John N.?
?


________________________________?

This e-mail and any files transmitted with it may be proprietary and are 
intended solely for the use of the individual or entity to whom they are 
addressed. If you have received this e-mail in error please notify the sender.?

Please note that any views or opinions presented in this e-mail are solely those 
of the author and do not necessarily represent those of ITT Corporation. The 
recipient should check this e-mail and any attachments for the presence of 
viruses. ITT accepts no liability for any damage caused by any virus transmitted 
by this e-mail.?
?

---------------------------------------------------?

Technet Mail List provided as a service by IPC using LISTSERV 15.0?

To unsubscribe, send a message to [log in to unmask] with following text in?

the BODY (NOT the subject field): SIGNOFF Technet?

To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)?

To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest?

Search the archives of previous posts at: http://listserv.ipc.org/archives?

Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or 
847-615-7100 ext.2815?

----------------------------------------------------- ?

---------------------------------------------------?

Technet Mail List provided as a service by IPC using LISTSERV 15.0?

To unsubscribe, send a message to [log in to unmask] with following text in?

the BODY (NOT the subject field): SIGNOFF Technet?

To temporarily halt or (re-start) delivery of Technet send e-mail to 
[log in to unmask]: SET Technet NOMAIL or (MAIL)?

To receive ONE mailing per day of all the posts: send e-mail to 
[log in to unmask]: SET Technet Digest?

Search the archives of previous posts at: http://listserv.ipc.org/archives?

Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for 
additional information, or contact Keach Sasamori at [log in to unmask] or 
847-615-7100 ext.2815?

-----------------------------------------------------?



 


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To 
unsubscribe, send a message to [log in to unmask] with following text in the BODY 
(NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) 
delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or 
(MAIL) To receive ONE mailing per day of all the posts: send e-mail to 
[log in to unmask]: SET Technet Digest Search the archives of previous posts at: 
http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 
for additional information, or contact Keach Sasamori at [log in to unmask] or 
847-615-7100 ext.2815
-----------------------------------------------------



 


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2