So, the ink should be applied before a reflow pass and it will cling nicely to the board...
Dale Ritzen, CQA
Quality Manager/ISO Management Representative
Austin Manufacturing Services
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Rizzo, Joseph
Sent: Tuesday, March 10, 2009 3:14 PM
To: [log in to unmask]
Subject: Re: [TN] PCBA Marking Inks
You will need an epoxy based ink. After marking you need to bake the ink in an oven.
Joseph Rizzo
770 Park Ave.
Huntington, N.Y. 11743
Tel.: 631-549-6512
Fax.: 631-549-6114
e-mail: [log in to unmask]
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Richard Kraszewski
Sent: Tuesday, March 10, 2009 4:02 PM
To: [log in to unmask]
Subject: [TN] PCBA Marking Inks
Looking for recommendations on PCBA printing inks (for serial's, part#'s, logos, legends, etc.) that can survive a pass or two through an in-line cleaner with semi-aqueous chemistry.
Any thoughts on types, brands, processes, etc. would be appreciated.
Rich K
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
Confidentiality Notice:
This e-mail and any attachments may contain proprietary or export restricted information. If you are not the intended recipient or an authorized transferee, use or dissemination is prohibited. Please delete and notify sender.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
