John,
I am glad you asked this. I just received an advertisement from some
company called PKMetal for a "MS2 Molten Solder Surfactant" which is
supposed to reduce dross. It worries me to add anything to the pot that
might be a pain to deal with later. So...I was wondering the same
thing! What's the experience out there?
Carl
dca
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of john
Sent: Tuesday, March 10, 2009 5:04 AM
To: [log in to unmask]
Subject: [TN] Additive to reduce dross in Wave solder
Hi Guys, have you any thoughts on adding an additive to the wave solder
pots
to reduce dross have any of you had experience with this application I
have
been asked to look at this
and It scares me a little
The purpose of this project is to evaluate the two high potential Solder
Surfactant/Antioxidant, MS2-200LF & JR07-VI, to get its quantitive and
qualitative performance and cost saving in lead-free wave soldering
process.
JTEC-EUROPE Ltd.
Cell / Mobile : +44(0)7921 197 587,
Office Dial : +44(0)1355271970,
Email: [log in to unmask],
Skype: john.jtec
P Please consider the environment before printing this email.
This message is for the named person's use only. It may contain
confidential, proprietary or legally privileged information. If you
receive
this message in error, please immediately delete it and all copies of it
from your system, destroy any hard copies of it and notify us by e-mail
to
[log in to unmask] with a copy of this message. You must not,
directly or
indirectly, use, disclose, distribute, print or copy any part of this
message if you are not the intended recipient. JTEC-Europe Ltd reserves
the
right to monitor all e-mail communications through its networks.
JTEC-Europe
Ltd is neither liable for the proper, complete transmission of the
information contained in this communication nor any delay in its
receipt.
This e-mail was scanned for the presence or computer virus
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
