Subject: | |
From: | |
Reply To: | |
Date: | Thu, 5 Mar 2009 17:49:17 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
It might been that there is actually a foot on the pads and you have some bridging going on if the pads are very close. That is normally caused by the catalyst that the nickel/gold adheres to during plating remaining on the laminate. Check a part before processing and see if the pads have a large foot and if you can see any plating between them.
Scott B. Westheimer
5709 Clarks Fork Drive
Raleigh, NC 27616
[log in to unmask]
Home: (919)713-0748
Cell NC: (919)961-5364
> Date: Thu, 5 Mar 2009 15:09:02 -0500
> From: [log in to unmask]
> Subject: [TN] ENIG Question
> To: [log in to unmask]
>
> Hello All,
> I have a question regarding a strange situation regarding reflow
> soldering ENIG finish boards.
> We have seen a few boards that have what seems to be gold "washing "
> down between pads and creating shorts. This seems to come and go. This
> is a flex circuit that is placed on a pallet to go through our SMT line.
> One other bothersome issue is that we are having difficulty getting
> proper solder stencil alignment across all the flexes in the pallet. I
> am pushing to have the flex "panelized" from the vendor to increase
> positional accuracy but the jury is still out on that.
> I suspect these two issues are related. If the solder gets deposited
> "off pad"slightly could the washing process be moving some of the gold
> in between pads? I attached an example.
> Has anybody come across this?
> If so, what was the solution?
>
> Thanks,
> Dave Connitt CID+
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
> -----------------------------------------------------
_________________________________________________________________
Express your personality in color! Preview and select themes for HotmailŪ.
http://www.windowslive-hotmail.com/LearnMore/personalize.aspx?ocid=TXT_MSGTX_WL_HM_express_032009#colortheme
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|