We use this product in our Robotic Tinning Cells made by V-Tek. These
cells have automatic dross skimmers on top of the laminar flow solder
wells, and when we use this product coupled with our proprietary oxygen
evacuation vapor barrier the amount of dross is cut way, way down. It is
a good product. We used to use a number of de-oxidizers in our wave
solder machine, and this was the last one we used before shutting the
machine down. We no longer need to run the wave solder machine because
we added selective solder, which uses only the oxygen evacuation vapor
blanket over the fountain (no nitrogen needed). But I strongly recommend
you try the MS2 in your wave solder pot. It should work better than
Oxy-clean and other brands.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Carl Proescholdt
Sent: Tuesday, March 10, 2009 7:37 AM
To: [log in to unmask]
Subject: Re: [TN] Additive to reduce dross in Wave solder
John,
I am glad you asked this. I just received an advertisement from some
company called PKMetal for a "MS2 Molten Solder Surfactant" which is
supposed to reduce dross. It worries me to add anything to the pot that
might be a pain to deal with later. So...I was wondering the same
thing! What's the experience out there?
Carl
dca
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of john
Sent: Tuesday, March 10, 2009 5:04 AM
To: [log in to unmask]
Subject: [TN] Additive to reduce dross in Wave solder
Hi Guys, have you any thoughts on adding an additive to the wave solder
pots to reduce dross have any of you had experience with this
application I have been asked to look at this
and It scares me a little
The purpose of this project is to evaluate the two high potential Solder
Surfactant/Antioxidant, MS2-200LF & JR07-VI, to get its quantitive and
qualitative performance and cost saving in lead-free wave soldering
process.
JTEC-EUROPE Ltd.
Cell / Mobile : +44(0)7921 197 587,
Office Dial : +44(0)1355271970,
Email: [log in to unmask],
Skype: john.jtec
P Please consider the environment before printing this email.
This message is for the named person's use only. It may contain
confidential, proprietary or legally privileged information. If you
receive this message in error, please immediately delete it and all
copies of it from your system, destroy any hard copies of it and notify
us by e-mail to [log in to unmask] with a copy of this message. You
must not, directly or indirectly, use, disclose, distribute, print or
copy any part of this message if you are not the intended recipient.
JTEC-Europe Ltd reserves the right to monitor all e-mail communications
through its networks.
JTEC-Europe
Ltd is neither liable for the proper, complete transmission of the
information contained in this communication nor any delay in its
receipt.
This e-mail was scanned for the presence or computer virus
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing
per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
