TECHNET Archives

February 2009

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Graham Naisbitt <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Graham Naisbitt <[log in to unmask]>
Date:
Fri, 20 Feb 2009 12:41:16 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (62 lines)
Hi Bev and fellow Techies

Yes it is being changed both for IPC and IEC.

The recommended temperature for lead-free is presently under  
consideration at 180DegC.

IPC-J-STD005 is under A Rev and the committee will be meeting to  
review some RR testing we are completing in time for APEX in Las Vegas.

I hope this helps

Graham Naisbitt
Gen3 Systems

On 19 Feb 2009, at 20:41, Bev Christian wrote:

> Technetters,
> I would like your opinion on this.
>
> IPC-TM-650, Method 2.4.35 Solder Paste - Slump Test--1/95 states that
> hot slump is measured after exposure to 150C for 10 to 15 minutes. Do
> you think this should be changed for lead free solder pastes?
> Bev
> RIM
>
> ---------------------------------------------------------------------
> This transmission (including any attachments) may contain  
> confidential information, privileged material (including material  
> protected by the solicitor-client or other applicable privileges),  
> or constitute non-public information. Any use of this information by  
> anyone other than the intended recipient is prohibited. If you have  
> received this transmission in error, please immediately reply to the  
> sender and delete this information from your system. Use,  
> dissemination, distribution, or reproduction of this transmission by  
> unintended recipients is not authorized and may be unlawful.
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following  
> text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask] 
> : SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask] 
> : SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 
>  for additional information, or contact Keach Sasamori at [log in to unmask] 
>  or 847-615-7100 ext.2815
> -----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2