TECHNET Archives

February 2009

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Jack Olson <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Jack Olson <[log in to unmask]>
Date:
Fri, 13 Feb 2009 09:27:26 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (54 lines)
wow, I just realized that ipc.org doesn't work,
you have to use www.ipc.org

(someone should fix that)
onward thru the fog,
Jack


.
On Fri, Feb 13, 2009 at 8:55 AM, Jack Olson <[log in to unmask]> wrote:

> There is no such thing as "permissible current and voltage"
> in circuit board design, (except by safety regulations, and
> those requirements differ).
>
> There is a relationship between current, trace size and temperature
> (which is described by the curves in IPC-2221 Figure 6-4)
> so by increasing the current or decreasing the trace cross section,
> you increase the temperature.
>
> The curves will show the "temperature rise" above ambient for
> any given trace size and current. The key is in knowing what your
> "ambient temperature" is.
> ...and that's why we designers make the big bucks (just kidding!)
>
> The caution is that you don't want the temperature to affect
> the integrity of the board material, so for example if the Tg of
> a particular material is 170 degrees C, we may limit the maximum
> operating temperature to something like 135 degrees C
> (by adjusting the trace width or copper thickness, or by moving
> the trace from an internal to an external layer, or by pouring copper
> planes near it to dissipate the heat, etc.)
>
> also, clearances define maximum voltage, not trace size.
>
> You can get a better description of these concepts by downloading
> a draft of the new IPC-2152 (Current Carrying Capacity) at ipc.org
> under "Status of Standardization" in the Knowledge menu.
>
> hope that helps,
> Jack
>
>

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2