Subject: | |
From: | |
Reply To: | |
Date: | Thu, 19 Feb 2009 09:35:37 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Leif,
As a CM it varies greatly. We sometimes get boards that do not have
fiducials on them and end up using a PTH or a SMT pad. With this set-up
it's not uncommon to incorrectly read what is being used as a fiducial
and end up with a misprint. I'd say this happens about 20% of the time
we need to do it.
When we have a proper board with fiducials properly designed and located
and we wipe the stencil as specified any misprint triggers a corrective
action.
This is for products that are released for production.
On NPI we may have some misprints before we are completely happy with
the alignment but still a maximum of 2-3 panels.
Regards,
Jerry Dengler
Production Manager
Pergamon Corporation
PH: 610-239-0721
Fax: 610-239-0720
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Leif Erik Laerum
Sent: Thursday, February 19, 2009 9:00 AM
To: [log in to unmask]
Subject: [TN] Misprints
Technetters,
We are discussing misprints and what would be an acceptable ratio of
misprints. What are people on this forum comfortable with? I realize
this this is a very open ended question, but it would be interesting to
hear if there is a industry consensus on this one. What would trigger
corrective action?
Thank you!
--
Leif Erik Laerum
Quality Assurance Manager
Texas Memory Systems
[log in to unmask]
Tel: (713) 266-3200 x468
www.texmemsys.com
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|