TECHNET Archives

January 2009

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Gene Felder <[log in to unmask]>
Reply To:
Date:
Fri, 23 Jan 2009 08:23:44 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (216 lines)
Oh yes, explaining what you are doing to an auditor.  Typically, you need to
have what you are doing documented in your ESD control plan.

This link includes: "On a similar note, I was once asked to show an engineer
in Florida why he should use static dissipative table covering instead of
old back issues of the Miami Herald. The Herald actually performed
marginally better than the special table covering - on that beautiful but
humid day."

Like concrete, paper is hydroscopic and readily absorbs moisture from the
air.  It would be the water not the insulative paper that would provide a
path to ground.

Is this anyway to run a railroad?  No.

Gene n



-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Ted Tontis
Sent: 2009-01-23 7:56 AM
To: [log in to unmask]
Subject: Re: [TN] ESD Flooring - bare concrete

Steve,
	Check out this link
http://www.staticworx.com/articles/bare_concrete_anti-static_flooring.php .
From a quality stand point I wouldn't do it. At the least I would place a
dissipative epoxy coating on the floor in the areas you will be transferring
or handling material. It will also give his customers added insurance that
ESD is being addressed when or if he is audited. 

Regards,

Ted

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steven Creswick
Sent: Friday, January 23, 2009 9:39 AM
To: [log in to unmask]
Subject: Re: [TN] ESD Flooring - bare concrete

Dewey,

I think I understand your response, but the question still remains - is a
bare [untreated with anything] concrete floor [without mats to trip over]
able to minimize charge build-up?

His parts are crude, and pretty macroscopic by our standards.  His objective
is crude, and he needs it low cost, but reasonably safe for people and
product.  I know if one were to do it the way we normally would, I would
coat the floor, or put down ESD tiles and call it quits.  He is on less than
a shoestring budget, trying to make do as best as he can.  

The ESD people want to sell him mats and treatments that he can not afford.

Hence the question

Steve 

-----Original Message-----
From: Whittaker, Dewey (EHCOE) [mailto:[log in to unmask]] 
Sent: Friday, January 23, 2009 10:26 AM
To: TechNet E-Mail Forum; Steven Creswick
Subject: RE: [TN] ESD Flooring - bare concrete

Obvious is a treated concrete floor with an ESD safe coating. The
downside is maintenance and cleaning.
Large ESD mats may be better with dedicated ESD safe work areas.
Dewey

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steven Creswick
Sent: Friday, January 23, 2009 8:13 AM
To: [log in to unmask]
Subject: Re: [TN] ESD Flooring - bare concrete

Brian - Joyce,

This is HEAVY equipment [ie - dirty, filthy, grimy].  I have very little
concern about dirt and dust - just ESD suitability.

Any comments on suitability of the bare concrete floor to mitigate
charge
build-up and/or transfer?

Steve

-----Original Message-----
From: Brian Ellis [mailto:[log in to unmask]] 
Sent: Friday, January 23, 2009 6:39 AM
To: TechNet E-Mail Forum; Steven Creswick
Subject: Re: [TN] ESD Flooring - bare concrete

Dust?

Brian

Steven Creswick wrote:
> Techies,
> 
>  
> 
> My first Friday, pseudo-technical question - I have an acquaintance
that
is
> repairing pretty crude PWB assemblies used in the trucking industry
and
> needs to re-locate to gain more room.  He certainly does not require
> clean-room conditions.
> 
>  
> 
> My thought was that a bare concrete floor - free of oils and greases,
epoxy
> coatings, etc. - would work out ok for flooring.  If he had carts, he
could
> attach small brass chains, etc.  
> 
>  
> 
> Was also thinking that the floor would give up moisture in the Winter
and
> absorb it during the Summer and thereby help buffer humidity swings.
> 
>  
> 
> He still would require ESD work-stations.
> 
>  
> 
> What say the more ESD gurus?
> 
> 
> Steve
> 
>  
> 
>  
> 
> 
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text
in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
http://listserv.ipc.org/archives
> Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask]
or
847-615-7100 ext.2815
> -----------------------------------------------------
> 

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2