Sender: |
|
X-To: |
|
Date: |
Fri, 2 Jan 2009 09:20:30 -0500 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
base64 |
Content-Type: |
text/plain; charset="UTF-8" |
From: |
|
Parts/Attachments: |
|
|
Unless it's so thick that no signal will go through it should work. That is why a low frequency trancducer is used and that is why it should be a through mode - it won't tell where (which layers) but the location (X:Y)
Vladimir
----- Original Message -----
From: Bev Christian <[log in to unmask]>
To: TechNet E-Mail Forum <[log in to unmask]>; Igoshev, Vladimir
Sent: Fri Jan 02 09:14:24 2009
Subject: RE: [TN] PWB Delamination Detection by C-SAM
But won't it depend on how thick the board is - how many layers? If it
is a really thick one and the delam is in the middle...
Bev
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Igoshev, Vladimir
Sent: Friday, January 02, 2009 9:13 AM
To: [log in to unmask]
Subject: Re: [TN] PWB Delamination Detection by C-SAM
Hi Victor,
Through scan with a low frequency (30 or 15) transducer should be able
to do it.
Regards,
Vladimir
----- Original Message -----
From: TechNet <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Sent: Fri Jan 02 09:09:57 2009
Subject: [TN] PWB Delamination Detection by C-SAM
Fellow TechNetters:
Searching for supporting information on non destructive analysis with
C-SAM to confirm raw board delamination.
Victor,
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------------------------
This transmission (including any attachments) may contain confidential information, privileged material (including material protected by the solicitor-client or other applicable privileges), or constitute non-public information. Any use of this information by anyone other than the intended recipient is prohibited. If you have received this transmission in error, please immediately reply to the sender and delete this information from your system. Use, dissemination, distribution, or reproduction of this transmission by unintended recipients is not authorized and may be unlawful.
|
|
|