Sender: |
|
X-To: |
|
Date: |
Tue, 27 Jan 2009 10:26:21 -0500 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
quoted-printable |
Content-Type: |
text/plain; charset="us-ascii" |
From: |
|
Parts/Attachments: |
|
|
I've been provided with a C4 bumped die, peripheral contact pads, 200 micron pitch, and the alloy is Sn5Pb95 (classic C4, melting point approx 290C). Someone suggested attaching this to a BGA carrier substrate (core with low elastic modulus SLC layers to absorb the CTE mismatch) using Sn63 solder paste. Tough printing job, but possible. However, I don't believe we can get this laminate material up to 290C, so the alloy mix will be incomplete, meaning a likely brittle zone in the attach.
Only thought I have is using LTCC or HTCC instead of the organic laminate.
Any other ideas out there? Anyone do reliability studies with this type of attach? Any input would be appreciated!
Wayne Thayer
________________________________
This e-mail and any files transmitted with it may be proprietary and are intended solely for the use of the individual or entity to whom they are addressed. If you have received this e-mail in error please notify the sender.
Please note that any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of ITT Corporation. The recipient should check this e-mail and any attachments for the presence of viruses. ITT accepts no liability for any damage caused by any virus transmitted by this e-mail.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|