Subject: | |
From: | |
Reply To: | |
Date: | Mon, 15 Dec 2008 09:24:02 -0000 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Moreover, after the 1-2 first PCBs are tested, then most if not all
Flying Probe Tester are using a "signature" system (discharge/RF/..) to
compare a supposed good first boards with the other "signatures"... made
with one finger probe onto 1 equipotential.. and done!
This is not necessarily true.
We use Itochu FPTs with UGS Tecnomatix software and the program is
written from the CAD data.
This technique does NOT use a 'golden' board.
We will typically produce a debugged FPT program from CAD data within
16hrs for something similar to a PC motherboard.
Producing a fully released FPT program would take longer. We are only
looking for manufacturing defects.
Regards
Rex
Rex Waygood
Technical Manager
PartnerTech Poole Ltd
Benson Road
Poole
Dorset BH17 0RY
United Kingdom
Tel: +44 (0)1202 674333
Fax: +44 (0)1202 678028
DDI: +44 (0)1202 338222
Mob: +44 (0)7887 997403
[log in to unmask]
www.PartnerTech.co.uk
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of roland jaquet
Sent: 13 December 2008 13:56
To: [log in to unmask]
Subject: [TN] IPC-6012 Class 3 - Electrical Test Requirement
Dear Technetters,
I am seeking your advice regarding Electrical Test requirement for a
Class 3 PCB.
Would it be acceptable to use a Flying probe tester or not?
For me, Flying Probe Testers do NOT perform a full proof ET as it does
not test each equipotential against all the other equipotentials.. but
only the adjacent ones..
Moreover, after the 1-2 first PCBs are tested, then most if not all
Flying Probe Tester are using a "signature" system (discharge/RF/..) to
compare a supposed good first boards with the other "signatures"... made
with one finger probe onto 1 equipotential.. and done!
More and more PCB manufacturers do not even have a bed of nail tester
anymore..
And even if they do have it, they tend not to use Flying Probe Tester
for small / medium batch regardless of the Class!
Thank you for your help/advice
Meilleures salutations
Very Best Regards
Roland
www.PCBspecialist.com
Roland Jaquet
Switzerland
T+41-79-203-3723
Active Member of the European Institute of Printed Circuits
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
-------------------------------------------------------------------------------
The information contained within this e-mail and any attachments contained therein may be confidential and/or legally privileged and is for the use of the intended recipient only. If you are not the intended recipient please delete it from your system and notify the sender by return e-mail. The content of this e-mail may not be copied or disclosed to any third parties without prior permission from the sender.
E-mail is susceptible to data corruption, interception, tampering and viruses. We do not accept any liability for any such incidents or any consequences thereof.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|