Subject: | |
From: | |
Reply To: | |
Date: | Tue, 4 Nov 2008 10:27:01 +0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello Pete,
Thank you for the information below.
BTW, did you do any test to improve wetting contact angle for the lead PTH
connected with copper plane with thermal relief? At the lead free wave
soldering process in our facility, the wetting contact angle exceed 90°
and the surface appearance of the solder joint looks as follows. Any
thoughts on this? Thanks a lot.
__
| | <--------------- Component Lead
| |
/ \
/ \ <-------------- Surface Appearance
of Solder Joint
/ \
/ \
| | <------------ 90° wetting
contact angle
_________|__________|________ The surface of copper plane
Best Regards
Charming Chan
PCBA Engineer
Pete Houwen <[log in to unmask]>
发件人: TechNet <[log in to unmask]>
2008-10-29 21:06
请答复 给 TechNet E-Mail Forum; 请答复 给 Pete Houwen
收件人: [log in to unmask]
抄送:
主题: Re: [TN] How to improve solder filling and wetting contact
angles for thermal vias at wave soldering process.
We did some testing of design parameters when we switched to lead-free,
and
found that the lead-hole ratio is more critical. We also found that top
side
pad size is irrelevant for hole fill, but large bottom side pads can
adversly
affect hole fill. Using this chart, we are able to achieve 75% with
regularity
(and we do not have the best process controls in our plant):
Lead Range Pad Size Hole Size
.000-.017 0.05 0.026
.018-.022 0.06 0.035
.023-.027 0.07 0.04
.028-.032 0.07 0.046
.033-.042 0.08 0.052
.043-.052 0.09 0.062
.053-.063 0.1 0.073
.064-.076 0.11 0.086
.077-.086 0.12 0.096
.087-.106 0.14 0.116
.107-.115 0.15 0.125
(dimensions in inches)
standard plane connects are thermal relief, using (4) .008" spokes.
This testing was done only to establish design parameters, there are
plenty of
process parameters that will affect hole fill. But if your design
parameters
aren't good, all the process tweaks in the world won't fix trhe problem.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
--------------------------------------------------------
ZTE Information Security Notice: The information contained in this mail is solely property of the sender's organization. This mail communication is confidential. Recipients named above are obligated to maintain secrecy and are not permitted to disclose the contents of this communication to others.
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the originator of the message. Any views expressed in this message are those of the individual sender.
This message has been scanned for viruses and Spam by ZTE Anti-Spam system.
|
|
|