TECHNET Archives

October 2008

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Guy Ramsey <[log in to unmask]>
Reply To:
Date:
Mon, 20 Oct 2008 09:04:20 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (58 lines)
The pin hole section you sited applies to wave soldered connections, as does
much of the entire Section 5. 
Study the second paragraph on page 5-1.

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Charming Chan
Sent: Monday, October 20, 2008 4:54 AM
To: [log in to unmask]
Subject: [TN] Acceptance spec for pin hole/blow hole

Hello TechNet specialist, 

On section 5.2.2 of spec IPC-610D, the pin hole/blow hole defect spec for
class 2, 3 is 'Solder connections where pinholes, blowholes, voids, etc. 
reduce the connections below minimum requirements(not shown)'. 

My question is, what's the minimum requirements for solder joints of wave
soldering?  Thanks a lot.

Best Regards
Charming Chan
PCBA Engineer

--------------------------------------------------------
ZTE Information Security Notice: The information contained in this mail is
solely property of the sender's organization. This mail communication is
confidential. Recipients named above are obligated to maintain secrecy and
are not permitted to disclose the contents of this communication to others.
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the originator of the
message. Any views expressed in this message are those of the individual
sender.
This message has been scanned for viruses and Spam by ZTE Anti-Spam system.

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in the
BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet
NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send
e-mail to [log in to unmask]: SET Technet Digest Search the archives of
previous posts at: http://listserv.ipc.org/archives Please visit IPC web
site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2