You could refer to this guideline by Molex

http://www.molex.com/cgi-bin/bv/molex/jsp/common/staticLoader.jsp?fileNa
me=/tnotes/crimp.html&BV_SessionID=@@@@0317833708.1220357674@@@@&BV_Engi
neID=ccccadefdemjjglcflgcehedffgdfmk.0&channel=Tech+Library&chanName=&ch
annelId=-17162&programId=372059&progLink=Good+Crimps&chanLink=&pageTitle
=Good+Crimps


Vic,
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of McGlaughlin, Jeffrey
A
Sent: Tuesday, September 02, 2008 5:52 AM
To: [log in to unmask]
Subject: Re: [TN] Workmanship Standard - 4.8x0.8mm Push-On Crimp
Terminals

Try  IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire
Harness Assemblies.


Jeffrey A McGlaughlin, CID
Engineering Designer
Battelle
505 King Ave
Columbus Ohio 43201-2693
Phone (614)424-7582



-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of James Liddle
Sent: Tuesday, September 02, 2008 5:33 AM
To: [log in to unmask]
Subject: [TN] Workmanship Standard - 4.8x0.8mm Push-On Crimp Terminals

Hello

Can anyone point me in the direction of a Workmanship Standard that
could be applied to the mating of 4.8x0.8mm Fully Insulated Female
Push-On Crimp Terminal, such as Tyco Electronics Part Number 2-520194-2,
with its corresponding Tab?

I can't find anything relevant in either IPC-A-610 or IPC/WHMA-A-620.
The 'Do's and Don'ts' contained in 'Section B - Assembly' of Tyco
Electronics Document Number 114-2023
(http://ecommas.tycoelectronics.com/commerce/DocumentDelivery/DDEControl
ler?Action=showdoc&DocId=Specification+Or+Standard%7F114-2023%7FB%7Fpdf%
7FEnglish%7FENG_SS_114-2023_B.pdf) are about the only thing I have to go
on.

Thanks
James Liddle
_________________________________________________________________
Discover Bird's Eye View now with Multimap from Live Search
http://clk.atdmt.com/UKM/go/111354026/direct/01/
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------