TECHNET Archives

September 2008

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Lee Whiteman <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, [log in to unmask]
Date:
Tue, 30 Sep 2008 09:36:59 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (1 lines)
Brian and Juan,



Is HCFC-225 still legal to use? 



With the alcohol and HCFC-225 azeotrope, it should perform as well as HCFC-141B.



Lee Whiteman, PMP

Senior Member Engineering Staff

L-3 Communications East

Telephone: (856) 338-3508

FAX: (856) 338-2906

E-Mail: [log in to unmask]

 

-----Original Message-----

From: TechNet [mailto:[log in to unmask]] On Behalf Of Brian Ellis

Sent: Tuesday, September 30, 2008 9:27 AM

To: [log in to unmask]

Subject: Re: [TN] Big problem when coating with Parylene C.



Re: bans on HCFC-141b



This substance was banned from use as a solvent on 1 January 2002 across 

the EU (EC Regulation 2037/2000). There are certain exemptions to the 

HCFC use ban e.g. a temporary exemption for precision cleaning of 

electrical and other components in aerospace and aeronautics 

applications where the use ban shall enter into force on 31 December 2008.



If you are not in that industry sector exemption, you should not be 

using it. If you do fit into that exemption, you have exactly three 

months to qualify a substitute cleaning process.



Sorry, but that's the law.



Brian



Juan T. Marugán wrote:

> Good evening from Spain.

> 

> The problem we have is the following. After soldering, we conformal coating a 

> class 3 polyamide board (blind vias) with Parylene C. Until this moment, all is 

> OK.

> 

> Then, the board pass the ESS -thermal cycling-, and it is at this moment 

> when appears a halo around the solder joints. The test tape performed in that 

> area fails. I�ll send some pictures to Steeve Gregory for reference.

> 

> We have coated at the same time (and processed in the same conditions, 

> that is soldering, cleaning�) the �suspicions� polyamide boards with other type 

> of boards (polyamide & rigid). We only obtain negative results with the first 

> ones.

> 

> We have sent some boards to an external lab for FTIR testing, and we are 

> waiting for the final results.

> 

> Our though is that cause of the problem is the PCB, but we need to 

> demonstrate it. It's like some contaminant appears under the conformal 

> coating caused by the temperature (from the inner layers of the PCB?)

> 

> So, what we need is that somebody turns the �light� on.

> 

> Thank you for your help.

> 

> 

> 

> Juan T. Marugán López

> Supply Chain Management

> Indra Sistemas SA (Spain)

> 

> [log in to unmask]

> www.indra.es

> 

> ---------------------------------------------------

> Technet Mail List provided as a service by IPC using LISTSERV 15.0

> To unsubscribe, send a message to [log in to unmask] with following text in

> the BODY (NOT the subject field): SIGNOFF Technet

> To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)

> To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest

> Search the archives of previous posts at: http://listserv.ipc.org/archives

> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815

> -----------------------------------------------------

> 



---------------------------------------------------

Technet Mail List provided as a service by IPC using LISTSERV 15.0

To unsubscribe, send a message to [log in to unmask] with following text in

the BODY (NOT the subject field): SIGNOFF Technet

To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)

To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest

Search the archives of previous posts at: http://listserv.ipc.org/archives

Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815

-----------------------------------------------------


ATOM RSS1 RSS2